Phone us on : 01235 537539 or 07495 153364
Email us at : nortonraceparts@yahoo.co.uk
Please state part numbers wherever possible when ordering.
Email us at : nortonraceparts@yahoo.co.uk
Please state part numbers wherever possible when ordering.
A note to our customers.
The Indian owned TVS Norton Motorcycle Co. made a request to our website host to remove our website permanently from their servers or to disable access to it in a permanent manner, unless all stylised ‘Norton’ logos, and text containing stylised ‘Genuine Norton Parts’ were removed from our website. Although we are distributors & supply parts from licensed 'Norton' sippliers, we are not allowed to show this in the stylised ‘Norton’ logo. We would like to say that this does not compromise the build quality of any parts that we supply. To our knowledge, TVS do not cater for classic Norton motorcycles and without small companies like ourselves, old classic Nortons would no longer be supported with parts to keep these classics on the road. It’s not unreasonable to think that this may be enforced on all small companies in the UK that cater for classic Nortons.
The Indian owned TVS Norton Motorcycle Co. made a request to our website host to remove our website permanently from their servers or to disable access to it in a permanent manner, unless all stylised ‘Norton’ logos, and text containing stylised ‘Genuine Norton Parts’ were removed from our website. Although we are distributors & supply parts from licensed 'Norton' sippliers, we are not allowed to show this in the stylised ‘Norton’ logo. We would like to say that this does not compromise the build quality of any parts that we supply. To our knowledge, TVS do not cater for classic Norton motorcycles and without small companies like ourselves, old classic Nortons would no longer be supported with parts to keep these classics on the road. It’s not unreasonable to think that this may be enforced on all small companies in the UK that cater for classic Nortons.
We know how much time and effort is involved in building a dream Café Racer. Enthusiasts who build their own bikes invest a huge amount of time building and riding their bikes. That’s why we spend a lot of time fabricating and perfecting the parts that we make. Attention to detail and build quality is at the forefront of everything we do. Our parts are high quality, strong and built to last. Spend some time looking at our parts and build that dream bike you can’t wait to spend time with.
All of our Norton Wideline & Slimline Cafe Racer aluminium gas/petrol tanks & oil tanks are hand made in house using high quality 2mm aluminium.
All of our Norton seat units are hand made in house using high quality 3mm aluminium.
All of our aluminium Norton tanks & seats are tig welded to a high standard by a qualified coded welder.
We are now giving 12 & 24 month warranties on selected NRP manufactured parts. This warranty will apply to parts manufactured by NRP (Norton Race Parts) from 21/11/2019.
# To help navigate this page, please click the relative link below to view parts in that category. The link will open in a new tab. #
How to tell if you have a Wideline or Slimline frame
Petrol Tanks & associated parts:
Wideline 'standard' alloy petrol tanks
Wideline 'premium' alloy petrol tanks
Stainless petrol tank straps, mountings, weld on lugs
Tanks stops and frame rubbers
Slimline alloy petrol tanks - strapped on types
Slimline alloy petrol tanks - bolt on types
Slimline alloy petrol tank bolt on kits
Seat Units & associated parts:
Slimline alloy seats
Slimline alloy seat mounting kits
Norton Atlas semi duel seat unit & fitting kit
Slimline weld on & bolt on seat mounts
Wideline alloy seat units
Wideline seat fitting kits
Wideline weld in seat bracket
Fuel & Oil parts:
Open cell fuel foam
Petrol tank lines & decals
Monza caps & fuel caps
Petrol taps, fuel filters & fittings
Fuel/oil hose, clips, sealing washers
Air filters, manifolds - rubber and aluminium, float chamber extension
Carburettors & parts
Slimline Pre-Unit Oil Tanks & associated parts:
Standard Slimline alloy oil tanks for Pre-Unit engines
Premium Slimline alloy oil tanks fot Pre-Unit engines
Slimline oil tank fitting kit
Oil level sight tube
Remote oil drain block
Slimline Unit Oil Tanks & associated parts:
Standard Slimline alloy oil tanks for Unit engines
Premium Slimline alloy oil tanks for Unit engines
Slimline oil tank fitting kit
Wideline & Slimline Pre-Unit oil tank platforms
Road Wideline Pre-Unit Oil Tanks & associated parts:
Standard Road Wideline alloy oil tanks for Pre-Unit engines
Premium Road Wideline alloy oil tanks for Pre-unit engines
Road Wideline oil tank fitting kit - Pre-Unit
Road Wideline Unit Oil Tanks & associated parts:
Road Wideline alloy oil tanks for Unit engines & fitting kit
Breather kits, step ups, filter bolts, sealing washers, banjos, oil 'T' piece junctions,
filter mounting head, spin on filters
Oils & pressure switches:
Gearbox oil & chain spray grease
Unit Triumph oil pressure switch
Petrol Tanks & associated parts:
Wideline 'standard' alloy petrol tanks
Wideline 'premium' alloy petrol tanks
Stainless petrol tank straps, mountings, weld on lugs
Tanks stops and frame rubbers
Slimline alloy petrol tanks - strapped on types
Slimline alloy petrol tanks - bolt on types
Slimline alloy petrol tank bolt on kits
Seat Units & associated parts:
Slimline alloy seats
Slimline alloy seat mounting kits
Norton Atlas semi duel seat unit & fitting kit
Slimline weld on & bolt on seat mounts
Wideline alloy seat units
Wideline seat fitting kits
Wideline weld in seat bracket
Fuel & Oil parts:
Open cell fuel foam
Petrol tank lines & decals
Monza caps & fuel caps
Petrol taps, fuel filters & fittings
Fuel/oil hose, clips, sealing washers
Air filters, manifolds - rubber and aluminium, float chamber extension
Carburettors & parts
Slimline Pre-Unit Oil Tanks & associated parts:
Standard Slimline alloy oil tanks for Pre-Unit engines
Premium Slimline alloy oil tanks fot Pre-Unit engines
Slimline oil tank fitting kit
Oil level sight tube
Remote oil drain block
Slimline Unit Oil Tanks & associated parts:
Standard Slimline alloy oil tanks for Unit engines
Premium Slimline alloy oil tanks for Unit engines
Slimline oil tank fitting kit
Wideline & Slimline Pre-Unit oil tank platforms
Road Wideline Pre-Unit Oil Tanks & associated parts:
Standard Road Wideline alloy oil tanks for Pre-Unit engines
Premium Road Wideline alloy oil tanks for Pre-unit engines
Road Wideline oil tank fitting kit - Pre-Unit
Road Wideline Unit Oil Tanks & associated parts:
Road Wideline alloy oil tanks for Unit engines & fitting kit
Breather kits, step ups, filter bolts, sealing washers, banjos, oil 'T' piece junctions,
filter mounting head, spin on filters
Oils & pressure switches:
Gearbox oil & chain spray grease
Unit Triumph oil pressure switch
How to tell if you have a Norton Wideline or Slimline frame
NORTON ALLOY PETROL TANKS TO FIT WIDELINE & MANX FRAMES
#All of our Norton alloy petrol tanks have threaded Monza cap mounting bosses welded into the tank and the Monza caps are screwed on, not bonded.#
STANDARD RANGE
NORTON WIDELINE ALLOY PETROL TANKS
Norton Wideline 'Sprint' Alloy Petrol Tank - Raw Standard Type
24 month warranty
We have now introduced a new standard Norton Wideline alloy ‘Sprint’ petrol tank to our range. We want to offer our customers a more cost effective build compared with our Norton alloy premium petrol tanks. Same quality as our 'Premium' Norton alloy petrol tanks, but a simpler build. Capacity is approximately 2.75 gallons with two ¼” BSP petrol tap bosses as standard. The top and sides of the tank are made from one piece of 2mm aluminium sheet. The underside is also made from one piece of 2mm aluminium sheet with a small tunnel welded in. The tunnel is smaller compared with the box tunnel that is fitted to our premium tanks, but still allows enough room to fit the engine head steady with no problems. The tank comes with a welded in threaded Monza ring & has a 2" Monza Cap that is screwed on. This tank is designed to work with clip-ons with no indents needed. This tank can be strapped on with one of our stainless steel tank strap assemblies (NRP 318 MT, NRP 324 MT or NRP 325 MT) and our weld on toggle mounting bracket (NRP 319MT).
We would also advise using 9 frame rubbers (NRP 100) and the lateral tank stops (NRP 318 TS) shown on this section further down the page.
WSS 275 R (Raw - metal finished, not polished)
Price: £675.00 (Ex VAT)
£810.00 (Inc VAT)
We have now introduced a new standard Norton Wideline alloy ‘Sprint’ petrol tank to our range. We want to offer our customers a more cost effective build compared with our Norton alloy premium petrol tanks. Same quality as our 'Premium' Norton alloy petrol tanks, but a simpler build. Capacity is approximately 2.75 gallons with two ¼” BSP petrol tap bosses as standard. The top and sides of the tank are made from one piece of 2mm aluminium sheet. The underside is also made from one piece of 2mm aluminium sheet with a small tunnel welded in. The tunnel is smaller compared with the box tunnel that is fitted to our premium tanks, but still allows enough room to fit the engine head steady with no problems. The tank comes with a welded in threaded Monza ring & has a 2" Monza Cap that is screwed on. This tank is designed to work with clip-ons with no indents needed. This tank can be strapped on with one of our stainless steel tank strap assemblies (NRP 318 MT, NRP 324 MT or NRP 325 MT) and our weld on toggle mounting bracket (NRP 319MT).
We would also advise using 9 frame rubbers (NRP 100) and the lateral tank stops (NRP 318 TS) shown on this section further down the page.
WSS 275 R (Raw - metal finished, not polished)
Price: £675.00 (Ex VAT)
£810.00 (Inc VAT)
Norton Wideline 'Sprint' Alloy Petrol Tank - Polished Standard Type
24 month warranty
Same spec as above, comes highly polished, with or without lines & decals. Pictures to follow shortly.
WSS 275 P (polished)
Price: £720.00 (Ex VAT)
£900.00 (Inc VAT)
WSS 275 P-LN (Polished with Tank Lines & Norton Decals)
Price: £790.00 (Ex VAT)
£948.00 (Inc VAT)
WSS 275 P-LT (Polished with Tank Lines & Triton Decals)
Price: £785.00 (Ex VAT)
£942.00 (Inc VAT)
Same spec as above, comes highly polished, with or without lines & decals. Pictures to follow shortly.
WSS 275 P (polished)
Price: £720.00 (Ex VAT)
£900.00 (Inc VAT)
WSS 275 P-LN (Polished with Tank Lines & Norton Decals)
Price: £790.00 (Ex VAT)
£948.00 (Inc VAT)
WSS 275 P-LT (Polished with Tank Lines & Triton Decals)
Price: £785.00 (Ex VAT)
£942.00 (Inc VAT)
NEW NRP Norton Wideline Standard 'Sprint' Alloy Petrol Tank - Painted & Lined
24 month warranty
Same spec as above, comes painted metallic silver with tank lines and Norton or Triton decals. All of our paint comes oven cured. Pictures to follow shortly.
WSS 275 NPL (Painted with Tank Lines & Norton Decals)
Price: £980.00 (Ex VAT)
£1,176.00 (Inc VAT)
WSS 275 TPL (Painted with Tank Lines & Triton Decals)
Price: £975.00 (Ex VAT)
£1,170.00 (Inc VAT)
Same spec as above, comes painted metallic silver with tank lines and Norton or Triton decals. All of our paint comes oven cured. Pictures to follow shortly.
WSS 275 NPL (Painted with Tank Lines & Norton Decals)
Price: £980.00 (Ex VAT)
£1,176.00 (Inc VAT)
WSS 275 TPL (Painted with Tank Lines & Triton Decals)
Price: £975.00 (Ex VAT)
£1,170.00 (Inc VAT)
PREMIUM RANGE
NORTON WIDELINE ALLOY PETROL TANKS
Norton Wideline Cafe Racer 2.5 Gallon - Thruxton Bad Boy - Alloy Sprint Petrol Tank - Premium Type
24 month warranty
This is our Norton 2.5 gallon " Thruxton Bad Boy " alloy petrol tank. It is lower than any of our other tanks with raised sides that follow the top frame rail & overlap approximately a ¹⁄₃ of the top tube. The sides of the tank are very compact removing the necessity for clip-on indents, this gives the tank a very sleek dynamic look. Made from 2mm aluminium with two ¹⁄₄" BSP tap bosses. Our tanks have a radiused neck and our box type tunnel the same as our other Norton Wideline alloy petrol tanks. It comes highly polished with a screwed on vented 2" Monza Cap, (not bonded) and will fit a Norton Road Wideline or Manx frame. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WNA 25 R (Raw - metal finished, not polished)
Price: £1017.85 (Ex VAT)
£1221.42 (Inc VAT)
Polished Tanks:
WNA 25 P (polished, no decals)
Price: £1,067.15 (Ex VAT)
£1,280.58 (Inc VAT)
WNA 25 P-LN (Polished, with Tank Lines & Norton Decals)
Price: £1,130.16 (Ex VAT)
£1,356.19 (Inc VAT)
WNA 25 P-LT (Polished, with Tank Lines & Triton Decals)
Price: £1,126.45 (Ex VAT)
£1,351.74 (Inc VAT)
Painted Tanks:
WNA 25 NPL (Painted, with Tank Lines & Norton Decals)
Price: £1,329.10 (Ex VAT)
£1,594.92 (Inc VAT)
WNA 25 TPL (Painted, with Tank Lines & Triton Decals)
Price: £1,325.39 (Ex VAT)
£1,590.47 (Inc VAT)
This is our Norton 2.5 gallon " Thruxton Bad Boy " alloy petrol tank. It is lower than any of our other tanks with raised sides that follow the top frame rail & overlap approximately a ¹⁄₃ of the top tube. The sides of the tank are very compact removing the necessity for clip-on indents, this gives the tank a very sleek dynamic look. Made from 2mm aluminium with two ¹⁄₄" BSP tap bosses. Our tanks have a radiused neck and our box type tunnel the same as our other Norton Wideline alloy petrol tanks. It comes highly polished with a screwed on vented 2" Monza Cap, (not bonded) and will fit a Norton Road Wideline or Manx frame. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WNA 25 R (Raw - metal finished, not polished)
Price: £1017.85 (Ex VAT)
£1221.42 (Inc VAT)
Polished Tanks:
WNA 25 P (polished, no decals)
Price: £1,067.15 (Ex VAT)
£1,280.58 (Inc VAT)
WNA 25 P-LN (Polished, with Tank Lines & Norton Decals)
Price: £1,130.16 (Ex VAT)
£1,356.19 (Inc VAT)
WNA 25 P-LT (Polished, with Tank Lines & Triton Decals)
Price: £1,126.45 (Ex VAT)
£1,351.74 (Inc VAT)
Painted Tanks:
WNA 25 NPL (Painted, with Tank Lines & Norton Decals)
Price: £1,329.10 (Ex VAT)
£1,594.92 (Inc VAT)
WNA 25 TPL (Painted, with Tank Lines & Triton Decals)
Price: £1,325.39 (Ex VAT)
£1,590.47 (Inc VAT)
Norton Wideline 4 Gallon Aluminium Petrol Tank with Monza Cap - Polished Premium Type
24 month warranty
Our Norton 4 gallon alloy petrol tank is made from 2mm highly polished aluminium, a threaded Monza ring is welded into the tank (our caps are not glued), baffled with two ¹⁄₄" BSP tap bosses. This tank is made for a Norton Wideline frame but will fit a Manx frame (Manx frame in picture above). A 4 gallon tank for a Manx frame is shown further down the page. This tank comes with our box type tunnel and radiused neck. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WNA 4 R (Raw - metal finished, not polished)
Price: £1,060.75 (Ex VAT)
£1,272.90 (Inc VAT)
Polished Tanks:
WNA 4 P - (Polished, no decals)
Price: £1,110.05 (Ex VAT)
£1,332.06 (Inc VAT)
Our Norton 4 gallon alloy petrol tank is made from 2mm highly polished aluminium, a threaded Monza ring is welded into the tank (our caps are not glued), baffled with two ¹⁄₄" BSP tap bosses. This tank is made for a Norton Wideline frame but will fit a Manx frame (Manx frame in picture above). A 4 gallon tank for a Manx frame is shown further down the page. This tank comes with our box type tunnel and radiused neck. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WNA 4 R (Raw - metal finished, not polished)
Price: £1,060.75 (Ex VAT)
£1,272.90 (Inc VAT)
Polished Tanks:
WNA 4 P - (Polished, no decals)
Price: £1,110.05 (Ex VAT)
£1,332.06 (Inc VAT)
Norton Wideline 4 Gallon Aluminium Triton Petrol Tank with Monza Cap - Polished with Tank Lines and Decals Premium Type
24 month warranty
This Norton, Triton alloy petrol tank is the same spec as above.
Please state the make and model of your engine that you are fitting to your frame.
WNA 4 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,173.06 (Ex VAT)
£1,407.67 (Inc VAT)
WNA 4 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,169.35 (Ex VAT)
£1,403.22 (Inc VAT)
This Norton, Triton alloy petrol tank is the same spec as above.
Please state the make and model of your engine that you are fitting to your frame.
WNA 4 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,173.06 (Ex VAT)
£1,407.67 (Inc VAT)
WNA 4 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,169.35 (Ex VAT)
£1,403.22 (Inc VAT)
Norton 4 GallonWideline Alloy Petrol Tank, Painted Metallic Silver, with Tank Lines and Dresda Triton Decals Premium Type
24 month warranty
Same spec as above.
Please state the make and model of your engine that you are fitting to your frame.
WNA 4 DTPL - (Painted, with Tank Lines, & Dresda Triton Decals)
Price: £1,382.00 (Ex VAT)
£1,658.40 (Inc VAT)
Same spec as above.
Please state the make and model of your engine that you are fitting to your frame.
WNA 4 DTPL - (Painted, with Tank Lines, & Dresda Triton Decals)
Price: £1,382.00 (Ex VAT)
£1,658.40 (Inc VAT)
Norton 4 Gallon Wideline Alloy Petrol Tank, Painted Metallic Silver, with Tank Lines and Decals Premium Type
24 month warranty
Same spec as above.
Please state the make and model of your engine that you are fitting to your frame.
WNA 4 NPL - (Painted, with Tank Lines & Norton Decals)
Price: £1,372.00 (Ex VAT)
£1,646.40 (Inc VAT)
WNA 4 TPL - (Painted, with Tank Lines & Triton Decals)
Price: £1,368.29 (Ex VAT)
£1,641.95 (Inc VAT)
Same spec as above.
Please state the make and model of your engine that you are fitting to your frame.
WNA 4 NPL - (Painted, with Tank Lines & Norton Decals)
Price: £1,372.00 (Ex VAT)
£1,646.40 (Inc VAT)
WNA 4 TPL - (Painted, with Tank Lines & Triton Decals)
Price: £1,368.29 (Ex VAT)
£1,641.95 (Inc VAT)
Norton Wideline 5 gallon "Isle of Man" Manx style Alloy Petrol Tank with Monza Cap - Polished Premium Type
24 month warranty
Our Norton 5 gallon alloy petrol tank is made from 2mm highly polished aluminium, a threaded Monza ring is welded into the tank (our caps are not glued), baffled with two ¹⁄₄" BSP tap bosses. This tank is made for a Norton Wideline frame but will fit a Manx frame as well. This 5 gallon "Isle of Man" tank comes highly polished with two ¹⁄₄" BSP petrol tap bosses, a breather pipe, and a 2¹⁄₂" Monza Cap as standard. This tank comes with our box type tunnel and radiused neck. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WNA 5 R (Raw, not polished)
Price: £1,110.68 (Ex VAT)
£1,332.82 (Inc VAT)
Polished tanks:
WNA 5 P (Polished, no decals)
Price: £1,167.81 (Ex VAT)
£1,401.37 (Inc VAT)
WNA 5 P - LN (Polished, with Tank Lines & Norton Decals)
Price: £1,266.21 (Ex VAT)
£1,519.45 (Inc VAT)
WNA 5 P - LT (Polished, with Tank Lines & Triton Decals)
Price: £1,262.51 (Ex VAT)
£1,515.01 (Inc VAT)
Our Norton 5 gallon alloy petrol tank is made from 2mm highly polished aluminium, a threaded Monza ring is welded into the tank (our caps are not glued), baffled with two ¹⁄₄" BSP tap bosses. This tank is made for a Norton Wideline frame but will fit a Manx frame as well. This 5 gallon "Isle of Man" tank comes highly polished with two ¹⁄₄" BSP petrol tap bosses, a breather pipe, and a 2¹⁄₂" Monza Cap as standard. This tank comes with our box type tunnel and radiused neck. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WNA 5 R (Raw, not polished)
Price: £1,110.68 (Ex VAT)
£1,332.82 (Inc VAT)
Polished tanks:
WNA 5 P (Polished, no decals)
Price: £1,167.81 (Ex VAT)
£1,401.37 (Inc VAT)
WNA 5 P - LN (Polished, with Tank Lines & Norton Decals)
Price: £1,266.21 (Ex VAT)
£1,519.45 (Inc VAT)
WNA 5 P - LT (Polished, with Tank Lines & Triton Decals)
Price: £1,262.51 (Ex VAT)
£1,515.01 (Inc VAT)
Norton 5 Gallon Wideline "Isle of Man" Manx Style Alloy Petrol Tank, Painted, with Tank Lines & Decals
24 month warranty
This is our Norton 5 gallon "Isle of Man" alloy petrol tank, fits Road Norton Wideline or Manx frame. It comes painted in Metallic Silver, lacquered, with NRP black and red lines NRP 0-0123, NRP 0-0124 and NRP Norton or Triton decals. As with all our tanks it is made from 2 mm aluminium and has our box type tunnel. A threaded Monza ring is welded into the tank (our caps are not glued), Comes with two ¹⁄₄" BSP petrol tap bosses, a breather pipe, and a 2¹⁄₂" Monza Cap as standard. The tank is baffled inside. All of our paintwork is oven cured.
WNA 5 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,457.32 (Ex VAT)
£1,748.78 (Inc VAT)
WNA 5 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,453.62 (Ex VAT)
£1,744.34 (Inc VAT)
This is our Norton 5 gallon "Isle of Man" alloy petrol tank, fits Road Norton Wideline or Manx frame. It comes painted in Metallic Silver, lacquered, with NRP black and red lines NRP 0-0123, NRP 0-0124 and NRP Norton or Triton decals. As with all our tanks it is made from 2 mm aluminium and has our box type tunnel. A threaded Monza ring is welded into the tank (our caps are not glued), Comes with two ¹⁄₄" BSP petrol tap bosses, a breather pipe, and a 2¹⁄₂" Monza Cap as standard. The tank is baffled inside. All of our paintwork is oven cured.
WNA 5 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,457.32 (Ex VAT)
£1,748.78 (Inc VAT)
WNA 5 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,453.62 (Ex VAT)
£1,744.34 (Inc VAT)
Norton 2.5 Gallon Alloy Petrol Tank - Fits a Manx frame
24 month warranty - (no pictures yet)
This is our Norton 2.5 gallon alloy "Manx" petrol tank. Fits a Manx frame only, will not fit a Road Wideline.
It is the same height as the Norton Wideline 2.5 alloy petrol tanks with raised sides that follow the top frame rail & overlap approximately a ¹⁄₃ of the top tube. The sides of the tank are very compact removing the necessity for clip-on indents, this gives the tank a very sleek dynamic look. The knee section follows the curve of the frame. Made from 2mm aluminium with two ¹⁄₄" BSP tap bosses. Our tanks have a radiused neck and our box type tunnel the same as our other Wideline tanks. It comes highly polished with a screwed on vented 2" Monza Cap, (not bonded) and will only fit a Manx frame. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WFM 25 R (Raw - metal finished, not polished)
Price: £1017.85 (Ex VAT)
£1,221.42 (Inc VAT)
Polished Tanks:
WFM 25 P (polished, no decals)
Price: £1,067.15 (Ex VAT)
£1,1280.58 (Inc VAT)
WFM 25 P-LN (Polished, with Tank Lines & Norton Decals)
Price: £1,130.16 (Ex VAT)
£1,356.19 (Inc VAT)
WFM 25 P-LT (Polished, with Tank Lines & Triton Decals)
Price: £1,126.45 (Ex VAT)
£1,351.74 (Inc VAT)
Painted Tanks:
WFM 25 NPL (Painted, with Tank Lines & Norton Decals)
Price: £1,329.10 (Ex VAT)
£1,594.92 (Inc VAT)
WFM 25 TPL (Painted, with Tank Lines & Triton Decals)
Price: £1,325.39 (Ex VAT)
£1,590.47 (Inc VAT)
This is our Norton 2.5 gallon alloy "Manx" petrol tank. Fits a Manx frame only, will not fit a Road Wideline.
It is the same height as the Norton Wideline 2.5 alloy petrol tanks with raised sides that follow the top frame rail & overlap approximately a ¹⁄₃ of the top tube. The sides of the tank are very compact removing the necessity for clip-on indents, this gives the tank a very sleek dynamic look. The knee section follows the curve of the frame. Made from 2mm aluminium with two ¹⁄₄" BSP tap bosses. Our tanks have a radiused neck and our box type tunnel the same as our other Wideline tanks. It comes highly polished with a screwed on vented 2" Monza Cap, (not bonded) and will only fit a Manx frame. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WFM 25 R (Raw - metal finished, not polished)
Price: £1017.85 (Ex VAT)
£1,221.42 (Inc VAT)
Polished Tanks:
WFM 25 P (polished, no decals)
Price: £1,067.15 (Ex VAT)
£1,1280.58 (Inc VAT)
WFM 25 P-LN (Polished, with Tank Lines & Norton Decals)
Price: £1,130.16 (Ex VAT)
£1,356.19 (Inc VAT)
WFM 25 P-LT (Polished, with Tank Lines & Triton Decals)
Price: £1,126.45 (Ex VAT)
£1,351.74 (Inc VAT)
Painted Tanks:
WFM 25 NPL (Painted, with Tank Lines & Norton Decals)
Price: £1,329.10 (Ex VAT)
£1,594.92 (Inc VAT)
WFM 25 TPL (Painted, with Tank Lines & Triton Decals)
Price: £1,325.39 (Ex VAT)
£1,590.47 (Inc VAT)
Norton 4 Gallon "Manx" Alloy Petrol Tank - Fits a Manx frame
24 month warranty
This is our Norton 4 gallon alloy "Manx" petrol tank. Made specifically for a Manx frame (will not fit a Road Wideline frame). As with all our tanks it is made from 2 mm aluminium and has our box type tunnel. A threaded Monza ring is welded into the tank (our caps are not glued), comes with a 2" Monza cap, baffled with two ¹⁄₄" BSP tap bosses. Raw, polished & polished with lines and decals available also. The painted tanks come painted in Manx metallic silver, lacquered, with NRP Norton tank lines NRP 100104 & 100105 and NRP Norton vinyl decals NRP 0-0122A. All our paintwork is oven cured.
Raw Tanks:
WFM 4 R (Raw, not polished)
Price: £1,060.75 (Ex VAT)
£1,272.90 (Inc VAT)
Polished Tanks:
WFM 4 P (Polished, no decals)
Price: £1,110.05 (Ex VAT)
£1,332.06 (Inc VAT)
WFM 4 P - LN (Polished, with Tank Lines & Norton Decals)
Price: £1,173.06 (Ex VAT)
£1,407.67 (Inc VAT)
WFM 4 P - LT (Polished, with Tank Lines & Triton Decals)
Price: £1,169.35 (Ex VAT)
£1,403.22 (Inc VAT)
Painted Tanks:
WFM 4 NPL (Painted, with Tank Lines & Norton Decals)
Price: £1,372.00 (Ex VAT)
£1,646.40 (Inc VAT)
WFM 4 TPL (Painted, with Tank Lines & Triton Decals)
Price: £1,368.29 (Ex VAT)
£1,641.95 (Inc VAT)
This is our Norton 4 gallon alloy "Manx" petrol tank. Made specifically for a Manx frame (will not fit a Road Wideline frame). As with all our tanks it is made from 2 mm aluminium and has our box type tunnel. A threaded Monza ring is welded into the tank (our caps are not glued), comes with a 2" Monza cap, baffled with two ¹⁄₄" BSP tap bosses. Raw, polished & polished with lines and decals available also. The painted tanks come painted in Manx metallic silver, lacquered, with NRP Norton tank lines NRP 100104 & 100105 and NRP Norton vinyl decals NRP 0-0122A. All our paintwork is oven cured.
Raw Tanks:
WFM 4 R (Raw, not polished)
Price: £1,060.75 (Ex VAT)
£1,272.90 (Inc VAT)
Polished Tanks:
WFM 4 P (Polished, no decals)
Price: £1,110.05 (Ex VAT)
£1,332.06 (Inc VAT)
WFM 4 P - LN (Polished, with Tank Lines & Norton Decals)
Price: £1,173.06 (Ex VAT)
£1,407.67 (Inc VAT)
WFM 4 P - LT (Polished, with Tank Lines & Triton Decals)
Price: £1,169.35 (Ex VAT)
£1,403.22 (Inc VAT)
Painted Tanks:
WFM 4 NPL (Painted, with Tank Lines & Norton Decals)
Price: £1,372.00 (Ex VAT)
£1,646.40 (Inc VAT)
WFM 4 TPL (Painted, with Tank Lines & Triton Decals)
Price: £1,368.29 (Ex VAT)
£1,641.95 (Inc VAT)
Norton 5 Gallon "Isle of Man" Manx style Petrol Tank - Fits a Manx frame
24 month warranty (no pictures yet)
This is our Norton 5 gallon alloy petrol tank. Fits Manx frame only, will not fit a Road Wideline. Made from 2mm aluminium, a threaded Monza ring is welded into the tank (our caps are not glued), baffled with two ¹⁄₄" BSP tap bosses. The tank comes with two ¹⁄₄" BSP petrol tap bosses, a breather pipe, and a 2¹⁄₂" Monza Cap as standard. This tank comes with our box type tunnel and radiused neck. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks. The Norton 5 gallon "Isle of Man" tank comes in a raw finish, polished with or without tank lines and decals. The painted tanks come painted in Manx metallic silver, lacquered, with NRP Norton tank lines NRP 0-0123, NRP 0-0124 and NRP Norton vinyl decals NRP 0-0122A. All our paintwork is oven cured.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WFM 5 R (Raw, not polished)
Price: £1,110.68 (Ex VAT)
£1,332.82 (Inc VAT)
Polished Tanks:
WFM 5 P (Polished, no decals)
Price: £1,167.81 (Ex VAT)
£1,401.37 (Inc VAT)
WFM 5 P - LN (Polished, with Tank Lines & Norton Decals)
Price: £1,266.21 (Ex VAT)
£1,519.45 (Inc VAT)
WFM 5 P - LT (Polished, with Tank Lines & Triton Decals)
Price: £1,262.51 (Ex VAT)
£1,515.01 (Inc VAT)
Painted Tanks:
WFM 5 NPL (Painted, with Tank Lines & Norton Decals)
Price: £1,454.64 (Ex VAT)
£1,745.57 (Inc VAT)
WFM 5 TPL (Painted, with Tank Lines & Triton Decals)
Price: £1,453.62 (Ex VAT)
£1,744.34 (Inc VAT)
This is our Norton 5 gallon alloy petrol tank. Fits Manx frame only, will not fit a Road Wideline. Made from 2mm aluminium, a threaded Monza ring is welded into the tank (our caps are not glued), baffled with two ¹⁄₄" BSP tap bosses. The tank comes with two ¹⁄₄" BSP petrol tap bosses, a breather pipe, and a 2¹⁄₂" Monza Cap as standard. This tank comes with our box type tunnel and radiused neck. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks. The Norton 5 gallon "Isle of Man" tank comes in a raw finish, polished with or without tank lines and decals. The painted tanks come painted in Manx metallic silver, lacquered, with NRP Norton tank lines NRP 0-0123, NRP 0-0124 and NRP Norton vinyl decals NRP 0-0122A. All our paintwork is oven cured.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
WFM 5 R (Raw, not polished)
Price: £1,110.68 (Ex VAT)
£1,332.82 (Inc VAT)
Polished Tanks:
WFM 5 P (Polished, no decals)
Price: £1,167.81 (Ex VAT)
£1,401.37 (Inc VAT)
WFM 5 P - LN (Polished, with Tank Lines & Norton Decals)
Price: £1,266.21 (Ex VAT)
£1,519.45 (Inc VAT)
WFM 5 P - LT (Polished, with Tank Lines & Triton Decals)
Price: £1,262.51 (Ex VAT)
£1,515.01 (Inc VAT)
Painted Tanks:
WFM 5 NPL (Painted, with Tank Lines & Norton Decals)
Price: £1,454.64 (Ex VAT)
£1,745.57 (Inc VAT)
WFM 5 TPL (Painted, with Tank Lines & Triton Decals)
Price: £1,453.62 (Ex VAT)
£1,744.34 (Inc VAT)
Norton Wideline Stainless Steel Tank Strap Kits For Road Frames
24 month warranty
This is our revised Norton Wideline, Slimline tank strap kit assembly. The strap comes highly polished and complete with stainless steel fasteners and a specially moulded rubber backing for the strap. The rubber backing gives excellent protection to the alloy gas tank when fitted. All parts are stainless steel and the strap itself is 316 marine grade. This strap is suitable to use with all of our petrol tanks, simply cut the strap down to the required length.
We have designed a new toggle that has very fine adjustment via a screw located under the locking arm.
The kit consists of the toggle assembly, catchplate with stainless threaded rivets and cap nuts, and your choice of 3 strap designs, solid, circle, and club.
NRP 316 ST Solid - Price £124.99 (Ex VAT), £149.99 (Inc VAT)
NRP 323 ST Club - Price £124.99 (Ex VAT), £149.99 (Inc VAT)
NRP 326 ST Circle - Price £124.99 (Ex VAT), £149.99 (Inc VAT)
This is our revised Norton Wideline, Slimline tank strap kit assembly. The strap comes highly polished and complete with stainless steel fasteners and a specially moulded rubber backing for the strap. The rubber backing gives excellent protection to the alloy gas tank when fitted. All parts are stainless steel and the strap itself is 316 marine grade. This strap is suitable to use with all of our petrol tanks, simply cut the strap down to the required length.
We have designed a new toggle that has very fine adjustment via a screw located under the locking arm.
The kit consists of the toggle assembly, catchplate with stainless threaded rivets and cap nuts, and your choice of 3 strap designs, solid, circle, and club.
NRP 316 ST Solid - Price £124.99 (Ex VAT), £149.99 (Inc VAT)
NRP 323 ST Club - Price £124.99 (Ex VAT), £149.99 (Inc VAT)
NRP 326 ST Circle - Price £124.99 (Ex VAT), £149.99 (Inc VAT)
Norton Wideline, Slimline & Manx Frame Stainless Steel Tank Strap Kits
24 month warranty
This is our revised Norton Wideline, Slimline & "Manx frame" tank strap kit assembly. The strap comes highly polished and complete with stainless steel fasteners and a specially moulded rubber backing for the strap. The rubber backing gives excellent protection to the alloy gas tank when fitted. All parts are stainless steel and the strap itself is 316 marine grade. This strap is suitable to use with all of our petrol tanks, simply cut the strap down to the required length.
We have designed a new bolt on toggle that has very fine adjustment via a screw located under the locking arm.
The kit consists of the toggle assembly, catchplate with stainless threaded rivets and cap nuts, and your choice of 3 strap designs, solid, circle, and club.
When fitting one of these strap kits to a slimline, you will also need the toggle mounting bracket NRP 319 MT - shown below.
NRP 318 MT Solid - Price £106.99 (Ex VAT), £128.39 (Inc VAT)
NRP 325 MT Club - Price £106.99 (Ex VAT), £128.39 (Inc VAT)
NRP 324 MT Circle - Price £106.99 (Ex VAT), £128.39 (Inc VAT)
This is our revised Norton Wideline, Slimline & "Manx frame" tank strap kit assembly. The strap comes highly polished and complete with stainless steel fasteners and a specially moulded rubber backing for the strap. The rubber backing gives excellent protection to the alloy gas tank when fitted. All parts are stainless steel and the strap itself is 316 marine grade. This strap is suitable to use with all of our petrol tanks, simply cut the strap down to the required length.
We have designed a new bolt on toggle that has very fine adjustment via a screw located under the locking arm.
The kit consists of the toggle assembly, catchplate with stainless threaded rivets and cap nuts, and your choice of 3 strap designs, solid, circle, and club.
When fitting one of these strap kits to a slimline, you will also need the toggle mounting bracket NRP 319 MT - shown below.
NRP 318 MT Solid - Price £106.99 (Ex VAT), £128.39 (Inc VAT)
NRP 325 MT Club - Price £106.99 (Ex VAT), £128.39 (Inc VAT)
NRP 324 MT Circle - Price £106.99 (Ex VAT), £128.39 (Inc VAT)
Norton Wideline/Slimline Toggle Mounting Bolt Assembly.
Toggle mounting bolt for bolting on our bolt on toggle to the frame, consisting of cap head bolt, 2 x washers, spring washer and a cap nut, all in stainless steel.
NRP 320 ST
Price: £1.95 (ExVAT)
£2.34 (Inc VAT)
NRP 320 ST
Price: £1.95 (ExVAT)
£2.34 (Inc VAT)
Norton "Manx" style Toggle Mounting Bracket for Slimline frames.
This mounting tube can be notched and welded into your Slimline frame, allowing you to fit one of our stainless steel NRP 318 MT or NRP 324 MT or NRP 325 MT bolt on strap and toggle assemblies. This mount comes complete with a stainless steel cap head bolt, washers and cap nut to secure the toggle back plate to the bracket.
NRP 319 MT
Price £18.99 (Ex VAT)
£22.79 (Inc VAT)
NRP 319 MT
Price £18.99 (Ex VAT)
£22.79 (Inc VAT)
Norton "Manx" style Toggle Mounting Bracket for Wideline
This mounting tube can be notched and welded into your Wideline frame, allowing you to fit one of our stainless steel NRP 318 MT or NRP 324 MT or NRP 325 MT bolt on strap and toggle assemblies. This mount comes complete with a stainless steel cap head bolt, washers and cap nut to secure the toggle back plate to the bracket.
NRP 322 MT
Price £17.25 (Ex VAT)
£20.70 (Inc VAT)
NRP 322 MT
Price £17.25 (Ex VAT)
£20.70 (Inc VAT)
NEW Norton Toggle Mounting Bracket for Bolt-up Wideline Frame
This is a new addition to our toggle mounting bracket range. The solid mounting bar is threaded each end and comes complete with stainless fasteners ready to bolt into your frame. It should be located on the brackets where the rear subframe bolts to the main cradle.
NRP 0-0184
Price: £32.99 (Ex VAT)
£39.59 (Inc VAT)
NRP 0-0184
Price: £32.99 (Ex VAT)
£39.59 (Inc VAT)
Norton "Manx style" toggle lugs & fastener weld-on kit
This is a weld-on lug kit for welded Norton Wideline road frames. Kit consists of 1 spacer (jig), 1 steel nut, 2 steel lugs, stainless cap head bolt, 2 washers and a nyloc cap nut. If you want to use our bolt on toggle strap assembly instead of a Road Wideline strap assembly, you will need to weld these lugs on to your frame, or, use the NRP 322 MT assembly shown above. Comes with fitting instructions.
NRP 0-0019
Price: £11.99 (Ex VAT)
£14.39 (Inc VAT)
NRP 0-0019
Price: £11.99 (Ex VAT)
£14.39 (Inc VAT)
Norton Wideline, Slimline & Manx Frame Tank Stop Kit
This is our universal tank stop kit for our strapped on Norton Wideline and Slimline alloy petrol tanks. It can be spaced or reduced as required to fit various width petrol tank necks. Comes with two Dural bosses, two rubber buffers and a M6 cap head stainless steel bolt.
NRP 318 TS
Price: £42.95 (Ex VAT)
£51.54 (Inc VAT)
NRP 318 TS
Price: £42.95 (Ex VAT)
£51.54 (Inc VAT)
Norton Wideline & Slimline Tank Stops.
Tank stops shown fitted on the bike.
Norton Wideline & Slimline Petrol Tank Frame Rubbers.
We recommend a minimum of 9 rubbers on a Manx or Road Wideline frame, when fitting our tanks.
NRP 100
Price: £2.85 (Ex VAT) each
£3.42 (Inc VAT) each
NRP 100
Price: £2.85 (Ex VAT) each
£3.42 (Inc VAT) each
# All of our alloy petrol tanks have threaded Monza cap mounting bosses welded into the tank and the Monza caps are screwed on, not bonded #
STANDARD RANGE
NORTON SLIMLINE ALLOY PETROL TANKS - STRAPPED ON
Norton Slimline 'Sprint' Alloy Petrol Tank - Raw Standard Type
24 month warranty
We have now introduced a new standard Norton Slimline alloy ‘Sprint’ petrol tank to our range. We want to offer our customers a more cost effective build compared with our premium Norton alloy petrol tanks. Same quality as our 'Premium' petrol tanks, but a simpler build. Capacity is approximately 2.75 gallons with two ¼” BSP petrol tap bosses as standard. The top and sides of the tank are made from one piece of 2mm aluminium sheet. The underside is also made from one piece of 2mm aluminium sheet with a small tunnel welded in. The tunnel is smaller compared with the box tunnel that is fitted to our premium tanks, but still allows enough room to fit the engine head steady with no problems. The tank comes with a welded in threaded Monza ring & has a 2" Monza Cap that is screwed on. This tank is designed to work with clip-ons with no indents needed. This tank can be strapped on with one of our stainless steel tank strap assemblies (NRP 318 MT, NRP 324 MT or NRP 325 MT) and our weld on toggle mounting bracket (NRP 319MT).
We would also advise using 9 frame rubbers (NRP 100) and the lateral tank stops (NRP 318 TS) shown on the Wideline Tank section further up the page.
SSS 275 R (Raw - metal finished, not polished)
Price: £675.00 (Ex VAT)
£810.00 (Inc VAT)
We have now introduced a new standard Norton Slimline alloy ‘Sprint’ petrol tank to our range. We want to offer our customers a more cost effective build compared with our premium Norton alloy petrol tanks. Same quality as our 'Premium' petrol tanks, but a simpler build. Capacity is approximately 2.75 gallons with two ¼” BSP petrol tap bosses as standard. The top and sides of the tank are made from one piece of 2mm aluminium sheet. The underside is also made from one piece of 2mm aluminium sheet with a small tunnel welded in. The tunnel is smaller compared with the box tunnel that is fitted to our premium tanks, but still allows enough room to fit the engine head steady with no problems. The tank comes with a welded in threaded Monza ring & has a 2" Monza Cap that is screwed on. This tank is designed to work with clip-ons with no indents needed. This tank can be strapped on with one of our stainless steel tank strap assemblies (NRP 318 MT, NRP 324 MT or NRP 325 MT) and our weld on toggle mounting bracket (NRP 319MT).
We would also advise using 9 frame rubbers (NRP 100) and the lateral tank stops (NRP 318 TS) shown on the Wideline Tank section further up the page.
SSS 275 R (Raw - metal finished, not polished)
Price: £675.00 (Ex VAT)
£810.00 (Inc VAT)
Norton Slimline 'Sprint' Alloy Petrol Tank - Polished Standard Type
24 month warranty
Same spec as above, comes highly polished, with or without lines & decals. Pictures to follow shortly.
SSS 275 P (polished) # in stock #
Price: £720.00 (Ex VAT)
£900.00 (Inc VAT)
SSS 275 P-LN (Polished with Tank Lines & Norton Decals)
Price: £790.00 (Ex VAT)
£948.00 (Inc VAT)
SSS 275 P-LT (Polished with Tank Lines & Triton Decals)
Price: £785.00 (Ex VAT)
£942.00 (Inc VAT)
Same spec as above, comes highly polished, with or without lines & decals. Pictures to follow shortly.
SSS 275 P (polished) # in stock #
Price: £720.00 (Ex VAT)
£900.00 (Inc VAT)
SSS 275 P-LN (Polished with Tank Lines & Norton Decals)
Price: £790.00 (Ex VAT)
£948.00 (Inc VAT)
SSS 275 P-LT (Polished with Tank Lines & Triton Decals)
Price: £785.00 (Ex VAT)
£942.00 (Inc VAT)
Norton Slimline 'Sprint' Alloy Petrol Tank - Painted & Lined Standard Type
24 month warranty
Same spec as above, comes painted metallic silver with tank lines and Norton or Triton decals. All of our paint comes oven cured. Pictures to follow shortly.
SSS 275 NPL (Painted with Tank Lines & Norton Decals)
Price: £980.00 (Ex VAT)
£1,176.00 (Inc VAT)
SSS 275 TPL (Painted with Tank Lines & Triton Decals)
Price: £975.00 (Ex VAT)
£1,170.00 (Inc VAT)
Same spec as above, comes painted metallic silver with tank lines and Norton or Triton decals. All of our paint comes oven cured. Pictures to follow shortly.
SSS 275 NPL (Painted with Tank Lines & Norton Decals)
Price: £980.00 (Ex VAT)
£1,176.00 (Inc VAT)
SSS 275 TPL (Painted with Tank Lines & Triton Decals)
Price: £975.00 (Ex VAT)
£1,170.00 (Inc VAT)
PREMIUM RANGE
NORTON SLIMLINE ALLOY PETROL TANKS - STRAPPED ON
Norton Slimline 2.5 Gallon "Thruxton Bad Boy" Petrol Tank (strapped on type) Premium Type
24 month warranty
This is our Norton 2.5 gallon "Thruxton Bad Boy" alloy petrol tank. It is lower than any of our other tanks with raised sides that follow the top frame rail & overlap approximately a ¹⁄₃ of the top tube. We have moved the knee indents a little further forward & kept the sides of the tank very compact removing the necessity for clip-on indents, this gives the tank a very sleek dynamic look. The tank comes with a welded in threaded Monza ring, has a 2" Monza Cap that is screwed on & has a very highly polished finish. This tank can be strapped on with one of our stainless steel tank strap assemblies (NRP 318 MT, NRP 324 MT or NRP 325 MT) and our weld on toggle mounting bracket (NRP 319MT).
We would also advise using 9 frame rubbers (NRP 100) and the lateral tank stops (NRP 318 TS) shown on the Wideline Tank section further up the page.
Raw Tanks:
SNA 2515 R (Raw - metal finished, not polished)
Price: £1,009.64 (Ex VAT)
£1,211.57 (Inc VAT)
Polished Tanks:
SNA 2515 P (Polished)
Price: £1,058.94 (Ex VAT)
£1,270.73 (Inc VAT)
SNA 2515 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,121.95 (Ex VAT)
£1,346.34 (Inc VAT)
SNA 2515 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,118.24 (Ex VAT)
£1,341.89 (Inc VAT)
Painted Tanks:
SNA 2515 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,306.39 (Ex VAT)
£1,567.67 (Inc VAT)
SNA 2515 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,302.68 (Ex VAT)
£1,563.22 (Inc VAT)
This is our Norton 2.5 gallon "Thruxton Bad Boy" alloy petrol tank. It is lower than any of our other tanks with raised sides that follow the top frame rail & overlap approximately a ¹⁄₃ of the top tube. We have moved the knee indents a little further forward & kept the sides of the tank very compact removing the necessity for clip-on indents, this gives the tank a very sleek dynamic look. The tank comes with a welded in threaded Monza ring, has a 2" Monza Cap that is screwed on & has a very highly polished finish. This tank can be strapped on with one of our stainless steel tank strap assemblies (NRP 318 MT, NRP 324 MT or NRP 325 MT) and our weld on toggle mounting bracket (NRP 319MT).
We would also advise using 9 frame rubbers (NRP 100) and the lateral tank stops (NRP 318 TS) shown on the Wideline Tank section further up the page.
Raw Tanks:
SNA 2515 R (Raw - metal finished, not polished)
Price: £1,009.64 (Ex VAT)
£1,211.57 (Inc VAT)
Polished Tanks:
SNA 2515 P (Polished)
Price: £1,058.94 (Ex VAT)
£1,270.73 (Inc VAT)
SNA 2515 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,121.95 (Ex VAT)
£1,346.34 (Inc VAT)
SNA 2515 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,118.24 (Ex VAT)
£1,341.89 (Inc VAT)
Painted Tanks:
SNA 2515 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,306.39 (Ex VAT)
£1,567.67 (Inc VAT)
SNA 2515 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,302.68 (Ex VAT)
£1,563.22 (Inc VAT)
Norton Slimline 4 Gallon Alloy Petrol Tank with Monza Cap (strapped on type) Premium Type
24 month warranty
This Norton Slimline alloy petrol tank comes baffled, with a screwed on 2" Monza cap. All our tanks are designed to work with no indents needed. Two ¹⁄₄" BSP threaded bosses have been welded into the tank so that they are positioned on the outside of the frame tubes as standard. This prevents fouling on the carbs and velocity stacks. This tank comes with a very highly polished finish. Built with our box type tunnel & radiused neck. This tank can be strapped on with one of our stainless steel Norton tank strap assemblies (NRP 318 MT, NRP 324 MT & NRP 325 MT) and our weld on Norton Manx style toggle mounting bracket (NRP 319 MT). We would also advise using 9 Norton frame rubbers (NRP 100) and the lateral Norton tank stops (NRP 318 TS) shown on the Norton Wideline Alloy Petrol Tank section further up the page.
Please state the make and model of your engine that you are fitting to your frame when ordering.
Raw Tanks:
SNA 414 R (Raw - metal finished, not polished)
Price: £1,051.05 (Ex VAT)
£1,261.26 (inc VAT)
Polished Tanks:
SNA 414 P (polished)
Price: £1,100.35 (Ex VAT)
£1,320.42 (Inc VAT)
SNA 414 P-LN (polished, with tank lines & Norton decals)
Price: £1,163.36 (Ex VAT)
£1,396.03 (Inc VAT)
SNA 414 P-LT (polished, with tank lines & Triton decals)
Price: £1,159.65 (Ex VAT)
£1,391.58 (Inc VAT)
This Norton Slimline alloy petrol tank comes baffled, with a screwed on 2" Monza cap. All our tanks are designed to work with no indents needed. Two ¹⁄₄" BSP threaded bosses have been welded into the tank so that they are positioned on the outside of the frame tubes as standard. This prevents fouling on the carbs and velocity stacks. This tank comes with a very highly polished finish. Built with our box type tunnel & radiused neck. This tank can be strapped on with one of our stainless steel Norton tank strap assemblies (NRP 318 MT, NRP 324 MT & NRP 325 MT) and our weld on Norton Manx style toggle mounting bracket (NRP 319 MT). We would also advise using 9 Norton frame rubbers (NRP 100) and the lateral Norton tank stops (NRP 318 TS) shown on the Norton Wideline Alloy Petrol Tank section further up the page.
Please state the make and model of your engine that you are fitting to your frame when ordering.
Raw Tanks:
SNA 414 R (Raw - metal finished, not polished)
Price: £1,051.05 (Ex VAT)
£1,261.26 (inc VAT)
Polished Tanks:
SNA 414 P (polished)
Price: £1,100.35 (Ex VAT)
£1,320.42 (Inc VAT)
SNA 414 P-LN (polished, with tank lines & Norton decals)
Price: £1,163.36 (Ex VAT)
£1,396.03 (Inc VAT)
SNA 414 P-LT (polished, with tank lines & Triton decals)
Price: £1,159.65 (Ex VAT)
£1,391.58 (Inc VAT)
Norton Slimline 4 Gallon Alloy Petrol Gas Tank with Monza Cap Painted & Lined (strapped on type) Premium Type
24 month warranty
Same spec as above
SNA 414 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,347.80 (Ex VAT)
£1,617.36 (Inc VAT)
SNA 414 TPL (Painted with Tank Lines & Triton Decals)
Price £1,344.09 (Ex VAT)
£1,612.91 (Inc VAT)
Same spec as above
SNA 414 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,347.80 (Ex VAT)
£1,617.36 (Inc VAT)
SNA 414 TPL (Painted with Tank Lines & Triton Decals)
Price £1,344.09 (Ex VAT)
£1,612.91 (Inc VAT)
Norton Slimline "Isle of Man" Manx Style 5 Gallon Alloy Petrol Tank (strapped on type) Premium Type
24 month warranty
Norton Slimline 5 gallon petrol gas tank, made from 2mm aluminium, a threaded Monza ring is welded into the tank (our caps are not glued), baffled with two ¹⁄₄" BSP tap bosses. This 5 gallon "Isle of Man" Manx style petrol tank comes highly polished with two ¹⁄₄" BSP petrol tap bosses, a breather pipe, and a 2¹⁄₂" Monza Cap as standard. This tank comes with our box type tunnel and radiused neck. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks. This tank can be strapped on with one of our stainless steel Norton tank strap assemblies (NRP 318 MT, NRP 324 MT & NRP 325 MT) and our weld on Manx style toggle mounting bracket (NRP 319 MT).
We would also advise using 9 Norton frame rubbers (NRP 100) and the Norton lateral tank stops (NRP 318 TS) shown on the Norton Wideline Alloy Petrol Tank section.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
SNA 515 R (Raw, metal finished, not polished)
Price: £1,071.54 (Ex VAT)
£1,285.85 (Inc VAT)
Polished Tanks:
SNA 515 P (polished)
Price: £1,129.83 (Ex VAT)
£1,355.80 (Inc VAT)
SNA 515 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,201.44 (Ex VAT)
£1,441.73 (Inc VAT)
SNA 515 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,197.73 (Ex VAT)
£1,437.28 (Inc VAT)
Norton Slimline 5 gallon petrol gas tank, made from 2mm aluminium, a threaded Monza ring is welded into the tank (our caps are not glued), baffled with two ¹⁄₄" BSP tap bosses. This 5 gallon "Isle of Man" Manx style petrol tank comes highly polished with two ¹⁄₄" BSP petrol tap bosses, a breather pipe, and a 2¹⁄₂" Monza Cap as standard. This tank comes with our box type tunnel and radiused neck. Fuel tap position is on the outside of the frame rails for easy access, and prevents fouling on carbs and velocity stacks. This tank can be strapped on with one of our stainless steel Norton tank strap assemblies (NRP 318 MT, NRP 324 MT & NRP 325 MT) and our weld on Manx style toggle mounting bracket (NRP 319 MT).
We would also advise using 9 Norton frame rubbers (NRP 100) and the Norton lateral tank stops (NRP 318 TS) shown on the Norton Wideline Alloy Petrol Tank section.
Please state the make and model of your engine that you are fitting to your frame.
Raw Tanks:
SNA 515 R (Raw, metal finished, not polished)
Price: £1,071.54 (Ex VAT)
£1,285.85 (Inc VAT)
Polished Tanks:
SNA 515 P (polished)
Price: £1,129.83 (Ex VAT)
£1,355.80 (Inc VAT)
SNA 515 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,201.44 (Ex VAT)
£1,441.73 (Inc VAT)
SNA 515 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,197.73 (Ex VAT)
£1,437.28 (Inc VAT)
Norton Slimline 5 Gallon Alloy Petrol Tank with Monza Cap Painted & Lined (strapped on type) Premium Type
24 month warranty
All of our Norton Slimline alloy petrol gas tanks are designed to work with no indents needed. Two ¹⁄₄" BSP threaded bosses have been welded in as standard. This tank comes baffled, with a 2¹⁄₂" Monza Cap, painted metallic silver with tank lines and Norton or Triton decals. All of our paint comes oven cured. Comes with our box type tunnel & radiused neck. This tank can be strapped on with one of our stainless steel tank strap assemblies (NRP 318 MT, NRP 324 MT & NRP 325 MT) and our weld on toggle mounting bracket (NRP 319 MT).
We would also advise using 9 frame rubbers (NRP 100) and the lateral tank stops (NRP 318 TS) shown on the Wideline Tank section.
SNA 515 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,378.05 (Ex VAT)
£1,653.66 (Inc VAT)
SNA 515 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,374.34 (Ex VAT)
£1,649.21 (Inc VAT)
NORTON SLIMLINE PETROL GAS TANKS - BOLT ON
Norton Slimline 2.5 Gallon "Thruxton Bad Boy" Alloy Petrol Gas Tank (bolt on type) Premium Type
24 month warranty
This is our Norton 2.5 gallon "Thruxton Bad Boy" alloy petrol gas tank. It is lower than any of our other tanks with raised sides that follow the top frame rail & overlap approximately a ¹⁄₃ of the top tube. We have moved the knee indents a little further forward & kept the sides of the tank very compact removing the necessity for clip-on indents, this gives the tank a very sleek dynamic look. The tank comes with a 2" Monza Cap & has a very highly polished finish. This tank has been designed to be fully rubber mounted and bolted on with no modifications needed. Please state model and make of the engine you are fitting to your frame. Fitting kits and the associated parts are available separately.
Use fitting kit NRP 010164 with this tank.
Pictures of polished & lined & painted & lined tanks to be added in due course.
Raw Tanks:
NRP SNA 25 R (Raw - metal finished, not polished)
Price: £1,171.62 (Ex VAT)
£1,405.94 (Inc VAT)
Polished Tanks:
NRP SNA 25 P (Polished)
Price: £1,220.92 (Ex VAT)
£1,465.10 (Inc VAT)
SNA 25 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,283.93 (Ex VAT)
£1,1540.72 (Inc VAT)
SNA 25 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,280.22 (Ex VAT)
£1,1536.26 (Inc VAT)
Painted Tanks:
SNA 25 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,389.96 (Ex VAT)
£1,667.95 (Inc VAT)
SNA 25 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,386.45 (Ex VAT)
£1,663.74 (Inc VAT)
This is our Norton 2.5 gallon "Thruxton Bad Boy" alloy petrol gas tank. It is lower than any of our other tanks with raised sides that follow the top frame rail & overlap approximately a ¹⁄₃ of the top tube. We have moved the knee indents a little further forward & kept the sides of the tank very compact removing the necessity for clip-on indents, this gives the tank a very sleek dynamic look. The tank comes with a 2" Monza Cap & has a very highly polished finish. This tank has been designed to be fully rubber mounted and bolted on with no modifications needed. Please state model and make of the engine you are fitting to your frame. Fitting kits and the associated parts are available separately.
Use fitting kit NRP 010164 with this tank.
Pictures of polished & lined & painted & lined tanks to be added in due course.
Raw Tanks:
NRP SNA 25 R (Raw - metal finished, not polished)
Price: £1,171.62 (Ex VAT)
£1,405.94 (Inc VAT)
Polished Tanks:
NRP SNA 25 P (Polished)
Price: £1,220.92 (Ex VAT)
£1,465.10 (Inc VAT)
SNA 25 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,283.93 (Ex VAT)
£1,1540.72 (Inc VAT)
SNA 25 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,280.22 (Ex VAT)
£1,1536.26 (Inc VAT)
Painted Tanks:
SNA 25 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,389.96 (Ex VAT)
£1,667.95 (Inc VAT)
SNA 25 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,386.45 (Ex VAT)
£1,663.74 (Inc VAT)
Norton Slimline Alloy Petrol Gas Tank - Bolt On Base - Premium Type
All of our Norton Slimline alloy bolt on petrol gas tanks, from the Norton 2.5 gallon up to the Norton 5 gallon have this type of base. Two brackets have been welded at the front portion of the tank to allow for standard fitment to the frame. The rear has a slotted box section mounting which accommodates a square stainless nut and stud.
Both the Norton strap on and bolt on alloy petrol tanks have two threaded petrol tap bosses instead of the single tap found on the standard Norton Atlas petrol gas tanks. The underside has been revised and is now a larger box type construction giving more area over the top of the engine, improving air flow, form and stiffness. The lower part of the sidewalls are double skinned giving a high degree of strength. This design not only looks better, but is more practical for special builds. The tap bosses are on the outside of the frame rails preventing the taps from fouling on the carburettors or velocity stacks.
Both the Norton strap on and bolt on alloy petrol tanks have two threaded petrol tap bosses instead of the single tap found on the standard Norton Atlas petrol gas tanks. The underside has been revised and is now a larger box type construction giving more area over the top of the engine, improving air flow, form and stiffness. The lower part of the sidewalls are double skinned giving a high degree of strength. This design not only looks better, but is more practical for special builds. The tap bosses are on the outside of the frame rails preventing the taps from fouling on the carburettors or velocity stacks.
Norton Slimline 4 Gallon Alloy Petrol Gas Tank with Monza Cap (bolt on type) Premium Type
24 month warranty
This Norton Slimline alloy petrol gas tank comes baffled with a 2" Monza cap. All our Norton & Triton alloy petrol tanks are designed to work with no indents needed. Two ¹⁄₄" BSP threaded bosses have been welded in as standard. This tank comes with a very highly polished finish. Built with our box type tunnel, radiused neck, and the same mounting system as shown on the tank directly above.
Please state the make and model of your engine that you are fitting to your frame when ordering.
Raw Tanks:
SNA 4 R (Raw- metal finished, not polished)
Price: £1,208.80 (Ex VAT)
£1,450.60 (Inc VAT)
Polished Tanks:
SNA 4 P (polished)
Price: £1,258.10 (Ex VAT)
£1,509.72 (Inc VAT)
SNA 4 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,321.11 (Ex VAT)
£ 1,585.33 (Inc VAT)
SNA 4 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,317.40 (Ex VAT)
£1,580.88 (Inc VAT)
This Norton Slimline alloy petrol gas tank comes baffled with a 2" Monza cap. All our Norton & Triton alloy petrol tanks are designed to work with no indents needed. Two ¹⁄₄" BSP threaded bosses have been welded in as standard. This tank comes with a very highly polished finish. Built with our box type tunnel, radiused neck, and the same mounting system as shown on the tank directly above.
Please state the make and model of your engine that you are fitting to your frame when ordering.
Raw Tanks:
SNA 4 R (Raw- metal finished, not polished)
Price: £1,208.80 (Ex VAT)
£1,450.60 (Inc VAT)
Polished Tanks:
SNA 4 P (polished)
Price: £1,258.10 (Ex VAT)
£1,509.72 (Inc VAT)
SNA 4 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,321.11 (Ex VAT)
£ 1,585.33 (Inc VAT)
SNA 4 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,317.40 (Ex VAT)
£1,580.88 (Inc VAT)
Norton Slimline 4 Gallon Alloy Petrol Gas Tank with Monza Cap Painted & Lined (bolt on type) Premium Type
24 month warranty
All of our Norton Slimline alloy petrol gas tanks are designed to work with no indents needed. Two ¹⁄₄" BSP threaded bosses have been welded in as standard. This alloy petrol tank comes baffled, with a 2" Monza Cap, painted metallic silver with tank lines and Norton or Triton decals. All of our paint comes oven cured. Comes with our box type tunnel, radiused neck, and the same mounting system as shown for the bolt on tank further up the page.
Please state the make and model of your engine that you are fitting to your frame when ordering.
SNA 4 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,425.22 (Ex VAT)
£1,710.26 (Inc VAT)
SNA 4 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,421.70 (Ex VAT)
£1,706.04 (Inc VAT)
All of our Norton Slimline alloy petrol gas tanks are designed to work with no indents needed. Two ¹⁄₄" BSP threaded bosses have been welded in as standard. This alloy petrol tank comes baffled, with a 2" Monza Cap, painted metallic silver with tank lines and Norton or Triton decals. All of our paint comes oven cured. Comes with our box type tunnel, radiused neck, and the same mounting system as shown for the bolt on tank further up the page.
Please state the make and model of your engine that you are fitting to your frame when ordering.
SNA 4 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,425.22 (Ex VAT)
£1,710.26 (Inc VAT)
SNA 4 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,421.70 (Ex VAT)
£1,706.04 (Inc VAT)
Norton Slimline "Isle of Man" Manx Style 5 Gallon Alloy Petrol Gas Tank (bolt on type) Premium Type
24 month warranty
This Norton Slimline alloy petrol gas tank comes with two ¹⁄₄" BSP threaded bosses as standard. Includes a 2 ¹⁄₂" Monza Cap, baffled with a breather pipe, and comes with a very highly polished finish. This tank comes with our box type tunnel, radiused neck, and the same mounting system as shown for the bolt on tank further up the page. Please state the make and model of the engine that you are fitting to your frame when ordering.
Raw Tanks:
SNA 5 R (Raw - metal finished, not polished)
Price: £1,248.72 (Ex VAT)
£1,498.46 (Inc VAT)
Polished Tanks:
SNA 5 P (polished)
Price: £1,305.85 (Ex VAT)
£1,1567.02 (Inc VAT)
SNA 5 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,305.85 (Ex VAT)
£1,567.02 (Inc VAT)
SNA 5 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,373.75 (Ex VAT)
£1,648.50 (Inc VAT)
This Norton Slimline alloy petrol gas tank comes with two ¹⁄₄" BSP threaded bosses as standard. Includes a 2 ¹⁄₂" Monza Cap, baffled with a breather pipe, and comes with a very highly polished finish. This tank comes with our box type tunnel, radiused neck, and the same mounting system as shown for the bolt on tank further up the page. Please state the make and model of the engine that you are fitting to your frame when ordering.
Raw Tanks:
SNA 5 R (Raw - metal finished, not polished)
Price: £1,248.72 (Ex VAT)
£1,498.46 (Inc VAT)
Polished Tanks:
SNA 5 P (polished)
Price: £1,305.85 (Ex VAT)
£1,1567.02 (Inc VAT)
SNA 5 P - LN (Polished with Tank Lines & Norton Decals)
Price: £1,305.85 (Ex VAT)
£1,567.02 (Inc VAT)
SNA 5 P - LT (Polished with Tank Lines & Triton Decals)
Price: £1,373.75 (Ex VAT)
£1,648.50 (Inc VAT)
Norton Slimline 5 Gallon "Isle of Man" Manx Style Alloy Petrol Gas Tank with Monza Cap Painted & Lined (bolt on type) Premium Type
24 month warranty
All of our Norton alloy petrol gas tanks are designed to work with no indents needed. Two ¹⁄₄" BSP threaded bosses have been welded in as standard. This tank comes baffled, with a 2¹⁄₂" Monza Cap, painted metallic silver with tank lines and Norton or Triton decals. All of our paint comes oven cured. Comes with our box type tunnel, radiused neck, and the same mounting system as shown for the bolt on tank further up the page.
Please state the make and model of your engine that you are fitting to your frame when ordering.
SNA 5 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,471.22 (Ex VAT)
£1,765.46 (Inc VAT)
SNA 5 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,467.71 (Ex VAT)
£1,761.25 (Inc VAT)
All of our Norton alloy petrol gas tanks are designed to work with no indents needed. Two ¹⁄₄" BSP threaded bosses have been welded in as standard. This tank comes baffled, with a 2¹⁄₂" Monza Cap, painted metallic silver with tank lines and Norton or Triton decals. All of our paint comes oven cured. Comes with our box type tunnel, radiused neck, and the same mounting system as shown for the bolt on tank further up the page.
Please state the make and model of your engine that you are fitting to your frame when ordering.
SNA 5 NPL (Painted with Tank Lines & Norton Decals)
Price: £1,471.22 (Ex VAT)
£1,765.46 (Inc VAT)
SNA 5 TPL (Painted with Tank Lines & Triton Decals)
Price: £1,467.71 (Ex VAT)
£1,761.25 (Inc VAT)
Norton Slimline Bolt On Alloy Petrol Gas Tank Fitting Kit (Stainless Steel)
24 month warranty
This kit is suitable for all of our bolt on Slimline petrol tanks.
Kit consists of the following items.
8 x Frame Rubbers
1 x M8 Stainless Button Head Bolt
3 x M8 Stainless Plain Washer
1 x M8 Stainless Spring Washer
3 x M8 Stainless Nyloc Nut
1 x 6 mm Polished Duralium Bracket
2 x M8 Stainless Hex Head Bolts
2 x M8 - 5 mm Rubber Washers
3 x Top Hat Rubber Washers
1 x M6 - 3 mm Rubber Washer
1 x M8 Square Nut
1 x M8 Steel Manifold Stud
NRP 010164
Price: £61.55 (Ex VAT)
£73.86 (Inc VAT)
This kit is suitable for all of our bolt on Slimline petrol tanks.
Kit consists of the following items.
8 x Frame Rubbers
1 x M8 Stainless Button Head Bolt
3 x M8 Stainless Plain Washer
1 x M8 Stainless Spring Washer
3 x M8 Stainless Nyloc Nut
1 x 6 mm Polished Duralium Bracket
2 x M8 Stainless Hex Head Bolts
2 x M8 - 5 mm Rubber Washers
3 x Top Hat Rubber Washers
1 x M6 - 3 mm Rubber Washer
1 x M8 Square Nut
1 x M8 Steel Manifold Stud
NRP 010164
Price: £61.55 (Ex VAT)
£73.86 (Inc VAT)
Norton Slimline Aluminium Seat Unit "Manx Style"
24 month warranty
This Norton alloy seat unit has a highly polished rear hump and sides, and is made entirely from 3mm aluminium, with the addition of 3mm aluminium angle along the outer edge to give maximum strength. All parts are tig welded, and the seat has been designed to fit the frame with our mounting kit with no modifications needed. This seat unit comes with 4 stainless steel M6 mounting studs, washers and nyloc nuts. Use fitting kit NRP 0-0091 (if you are not using one of our loops or NRP 0-0092 if you are using one of our loops. We can upholster this seat, please enquire for prices.
Seating length before upholstery: 350 mm
Overall length: 590 mm
NRP 111 SMA-R (Raw, metal finished)
Price: £343.03 (Ex VAT)
£414.04 (Inc VAT)
NRP 111 SMA-P (polished)
Price: £378.23 (Ex VAT)
£377.69 (Inc VAT)
Norton Slimline Aluminium Seat Unit, Painted
"Manx Style"
24 month warranty
This is the same Norton alloy seat unit as the NRP 111 SMA above but this one has been sprayed in Metallic Silver and two pack Lacquered. This one has been upholstered in black viny with red piping, upholstery is extra and not included in the price. All our paintwork is oven dried. If you would like vynil or leather upholstery, please email or call with your requirements for prices.
NRP 111 SMA-S, Painted (not lined, not upholstered)
Price: £532.91 (Ex VAT)
£639.49 (Inc VAT)
This is the same Norton alloy seat unit as the NRP 111 SMA above but this one has been sprayed in Metallic Silver and two pack Lacquered. This one has been upholstered in black viny with red piping, upholstery is extra and not included in the price. All our paintwork is oven dried. If you would like vynil or leather upholstery, please email or call with your requirements for prices.
NRP 111 SMA-S, Painted (not lined, not upholstered)
Price: £532.91 (Ex VAT)
£639.49 (Inc VAT)
Norton Slimline Aluminium Seat Unit, Painted & Lined "Manx Style"
24 month warranty
This is the same Norton alloy seat unit as the NRP 111 SMA above but this one has been sprayed in Metallic Silver and lined in two pack lacquer. This seat has been upholstered in black viny with red piping, upholstery is extra and not included in the price. All our paintwork is oven dried. If you would like vynil or leather upholstery, please email or call with your requirements for prices.
NRP 111 SMA-S-Lined, Painted and lined (not upholstered)
Price: £586.84 (Ex VAT)
£703.73 (Inc VAT)
This is the same Norton alloy seat unit as the NRP 111 SMA above but this one has been sprayed in Metallic Silver and lined in two pack lacquer. This seat has been upholstered in black viny with red piping, upholstery is extra and not included in the price. All our paintwork is oven dried. If you would like vynil or leather upholstery, please email or call with your requirements for prices.
NRP 111 SMA-S-Lined, Painted and lined (not upholstered)
Price: £586.84 (Ex VAT)
£703.73 (Inc VAT)
Norton Slimline Alloy Seat Fitting Kit - WITH Spacers
24 month warranty
This is our new Norton Slimline Seat Fitting Kit which is fully adjustable allowing our seats to be fitted easily in the desired position. Made from dural aluminium and comes with all stainless fasteners. If you are not fitting one of our loops, use this kit for all of our Norton Slimline Seat Units.
NRP 0-0091
Price: £115.55 (Ex VAT)
£138.66 (Inc VAT)
This is our new Norton Slimline Seat Fitting Kit which is fully adjustable allowing our seats to be fitted easily in the desired position. Made from dural aluminium and comes with all stainless fasteners. If you are not fitting one of our loops, use this kit for all of our Norton Slimline Seat Units.
NRP 0-0091
Price: £115.55 (Ex VAT)
£138.66 (Inc VAT)
Norton Slimline Alloy Seat Fitting Kit - WITHOUT Spacers
24 month warranty
This is our new Norton Slimline Seat Fitting Kit which is fully adjustable allowing our seats to be fitted easily in the desired position. Made from dural aluminium and comes with all stainless fasteners. If you are fitting one of our loops, use this kit for all of our Slimline Seat Units.
NRP 0-0092
Price: £109.00 (Ex VAT)
£130.80 (Inc VAT)
This is our new Norton Slimline Seat Fitting Kit which is fully adjustable allowing our seats to be fitted easily in the desired position. Made from dural aluminium and comes with all stainless fasteners. If you are fitting one of our loops, use this kit for all of our Slimline Seat Units.
NRP 0-0092
Price: £109.00 (Ex VAT)
£130.80 (Inc VAT)
Norton Slimline Seat Mounting Crossmember
12 month warranty
We are now offering a seat crossmember kit for Norton Slimline frames. Some of our customers have had the problem with their brackets being cut or ground off of their frames. This eight piece kit comes with everything to re-establish the missing parts. The pictures above show the assembly parts individually as well as assembled. The two short tube brackets are ready to be welded to the frame. All dimensions are of the original size. Nuts & spring washers are stainless.
NRP 0-0288
Price: £39.64 (Ex VAT)
£47.57 (Inc VAT)
We are now offering a seat crossmember kit for Norton Slimline frames. Some of our customers have had the problem with their brackets being cut or ground off of their frames. This eight piece kit comes with everything to re-establish the missing parts. The pictures above show the assembly parts individually as well as assembled. The two short tube brackets are ready to be welded to the frame. All dimensions are of the original size. Nuts & spring washers are stainless.
NRP 0-0288
Price: £39.64 (Ex VAT)
£47.57 (Inc VAT)
Norton Slimline Rear 'L' bracket for seat and loop mount
12 month warranty
We are now offering 'L' Bracket kits for Norton slimline frames that mount on the rear suspension post brackets. Early Norton Slimlines don't always have these brackets and on occasion they have been cut off some of the later frames. These will be necessary to fit our seat fitting kits and loops. Made to the same dimensions as used on the Norton Slimline Atlas. Brackets are made from steel plate and powder coated black with a slotted top hole and an extra slotted security hole to stop the bracket from pivoting when fastened to the frame, also includes the top rear shock absorber hole. NRP 0-0157 is a brackets only kit and NRP 0-0158 is brackets and stainless steel fasteners kit.
NRP 0-0157 [brackets only]
Price: £17.38 (Ex VAT) Set
£20.86 (Inc VAT)
NRP 0-0158 [with fasteners]
Price: £24.38 (Ex VAT) Set
£29.26 (Inc VAT)
We are now offering 'L' Bracket kits for Norton slimline frames that mount on the rear suspension post brackets. Early Norton Slimlines don't always have these brackets and on occasion they have been cut off some of the later frames. These will be necessary to fit our seat fitting kits and loops. Made to the same dimensions as used on the Norton Slimline Atlas. Brackets are made from steel plate and powder coated black with a slotted top hole and an extra slotted security hole to stop the bracket from pivoting when fastened to the frame, also includes the top rear shock absorber hole. NRP 0-0157 is a brackets only kit and NRP 0-0158 is brackets and stainless steel fasteners kit.
NRP 0-0157 [brackets only]
Price: £17.38 (Ex VAT) Set
£20.86 (Inc VAT)
NRP 0-0158 [with fasteners]
Price: £24.38 (Ex VAT) Set
£29.26 (Inc VAT)
Norton Wideline Alloy Seat Units
Norton Wideline "Daytona" Seat Unit
24 month warranty
This alloy seat unit will fit a Norton Wideline or a Manx frame, please specify which frame you are using. It has a highly polished rear hump and sides, and is made entirely from 3mm aluminium, with the addition of 3mm aluminium angle along the outer edge to give maximum strength. All parts are tig welded, and the seat has been designed to fit the frame with our mounting kit. This seat unit works best with a NRP 4 Gallon or 5 Gallon tank.
NRP 109 WMA
Price: £363.00 (Ex VAT)
£435.60 (Inc VAT)
This alloy seat unit will fit a Norton Wideline or a Manx frame, please specify which frame you are using. It has a highly polished rear hump and sides, and is made entirely from 3mm aluminium, with the addition of 3mm aluminium angle along the outer edge to give maximum strength. All parts are tig welded, and the seat has been designed to fit the frame with our mounting kit. This seat unit works best with a NRP 4 Gallon or 5 Gallon tank.
NRP 109 WMA
Price: £363.00 (Ex VAT)
£435.60 (Inc VAT)
Norton Wideline "Daytona" Alloy Seat Unit with a Norton 4 Gallon Alloy Petrol Tank
# Please note that the above bike's swing arm had been extended by three inches. On a standard frame and swing arm the seat would appear 3 inches further back giving more coverage over the rear wheel. #
Norton Wideline Alloy Seat Unit "Manx Style"
NRP 110 WMA upholstered in black leather with red leather piping - shown above ⤴
NRP 110 WMA upholstered in black vinyl with red vinyl piping - shown below ↓
24 month warranty
This alloy "Manx Style" seat unit will fit a Norton Wideline or a Manx frame, please specify which frame you need it for. It has a highly polished rear hump and sides, and is made entirely from 3mm aluminium, with the addition of 3mm aluminium angle along the outer edge to give maximum strength. All parts are tig welded, and the seat has been designed to fit the frame with our mounting kit. Here is a picture of the underside. A seat fitting kit is available - please use NRP 117 WMA which is shown a little further down the page.
Seat length before upholstery 350 mm
Overall length 590 mm
Note: Our seats do not come upholstered as standard. We can upholster in leather or vinyl, with or without piping, seat only or full covering. If you would like us to upholster your seat, please tell us your requirements and we will give you a price.
NRP 110 WMA-R
Price: £315.22 (Ex VAT)
£378.26 (Inc VAT)
NRP 110 WMA-P (Seat polished no upholstery)
Price: £348.42 (Ex VAT)
£418.10 (Inc VAT)
This alloy "Manx Style" seat unit will fit a Norton Wideline or a Manx frame, please specify which frame you need it for. It has a highly polished rear hump and sides, and is made entirely from 3mm aluminium, with the addition of 3mm aluminium angle along the outer edge to give maximum strength. All parts are tig welded, and the seat has been designed to fit the frame with our mounting kit. Here is a picture of the underside. A seat fitting kit is available - please use NRP 117 WMA which is shown a little further down the page.
Seat length before upholstery 350 mm
Overall length 590 mm
Note: Our seats do not come upholstered as standard. We can upholster in leather or vinyl, with or without piping, seat only or full covering. If you would like us to upholster your seat, please tell us your requirements and we will give you a price.
NRP 110 WMA-R
Price: £315.22 (Ex VAT)
£378.26 (Inc VAT)
NRP 110 WMA-P (Seat polished no upholstery)
Price: £348.42 (Ex VAT)
£418.10 (Inc VAT)
Norton "Manx Style" Alloy Seat Unit with a Norton 4 Alloy Gallon Gas Tank
Norton Wideline Seat Unit - Painted, Lacquered and Upholstered "Manx Style"
24 month warranty
This is the same seat as the NRP 110 WMA above but this one has been sprayed in Metallic Silver and two pack Lacquered, and has been upholstered in black vinyl with red piping. All our paintwork is oven dried. If you would like vynil or leather upholstery, with or without piping, please email or call for prices.
NRP 110 WMA-S (Seat painted, no upholstery)
Price: £488.71 (Ex VAT)
£586.45 (Inc VAT)
This is the same seat as the NRP 110 WMA above but this one has been sprayed in Metallic Silver and two pack Lacquered, and has been upholstered in black vinyl with red piping. All our paintwork is oven dried. If you would like vynil or leather upholstery, with or without piping, please email or call for prices.
NRP 110 WMA-S (Seat painted, no upholstery)
Price: £488.71 (Ex VAT)
£586.45 (Inc VAT)
Norton Wideline Alloy Seat Unit - Painted, Lined & Lacquered With Upholstery "Manx Style"
24 month warranty
This Norton alloy seat unit will fit a Norton Wideline frame or a Manx frame. Please specify which frame you have. It has been sprayed in Metallic Silver, lined with clear coat two pack lacquer. The seat is shown upholstered in black leather with red leather piping. All our paintwork is oven dried. If you would like leather or vinyl upholstery, with or without piping please email or call for prices.
NRP 110 WMA-S-Lined (Seat painted and lined with no upholstery)
Price: £561.27 (Ex VAT)
£673.52 (Inc VAT)
This Norton alloy seat unit will fit a Norton Wideline frame or a Manx frame. Please specify which frame you have. It has been sprayed in Metallic Silver, lined with clear coat two pack lacquer. The seat is shown upholstered in black leather with red leather piping. All our paintwork is oven dried. If you would like leather or vinyl upholstery, with or without piping please email or call for prices.
NRP 110 WMA-S-Lined (Seat painted and lined with no upholstery)
Price: £561.27 (Ex VAT)
£673.52 (Inc VAT)
Nortron Wideline Alloy TL Seat Unit
24 month warranty
This Norton alloy seat unit will fit a Norton Wideline or a Manx frame. Please specify which frame you have. It has a highly polished, elongated hump and is made entirely from 3mm aluminium, with the addition of 3mm aluminium angle along the outer edge to give maximum strength. All parts are tig welded, and the seat has been designed to fit the frame with our mounting kit (NRP 117 WMA for Road Wideline frames, or NRP 0-0126 for our Featherbed Manx frames). This seat comes with a polished stainless steel light/number plate bracket. The seat comes with a twin filament Replica Lucas 564 light unit. The seat length before upholstery is 350mm. The seat comes with 2 x M8 studs in the base to allow the unit to be bolted to the frame. The seat hump has been extended to allow the number plate to clear the end of our Manx rear mudguard.
The seat above has been upholstered in leather with white leather piping, it can also be upholstered in vinyl, with or without piping. If you would like any other colour, email or call us with your requirements.
NRP 107 WMA-R (Raw, metal finished seat, no upholstery)
Price: £528.41 (Ex VAT)
£634.09 (Inc VAT)
NRP 107 WMA-P (polished seat, no upholstery)
Price: £577.50 (Ex VAT)
£693.00 (Inc VAT)
This Norton alloy seat unit will fit a Norton Wideline or a Manx frame. Please specify which frame you have. It has a highly polished, elongated hump and is made entirely from 3mm aluminium, with the addition of 3mm aluminium angle along the outer edge to give maximum strength. All parts are tig welded, and the seat has been designed to fit the frame with our mounting kit (NRP 117 WMA for Road Wideline frames, or NRP 0-0126 for our Featherbed Manx frames). This seat comes with a polished stainless steel light/number plate bracket. The seat comes with a twin filament Replica Lucas 564 light unit. The seat length before upholstery is 350mm. The seat comes with 2 x M8 studs in the base to allow the unit to be bolted to the frame. The seat hump has been extended to allow the number plate to clear the end of our Manx rear mudguard.
The seat above has been upholstered in leather with white leather piping, it can also be upholstered in vinyl, with or without piping. If you would like any other colour, email or call us with your requirements.
NRP 107 WMA-R (Raw, metal finished seat, no upholstery)
Price: £528.41 (Ex VAT)
£634.09 (Inc VAT)
NRP 107 WMA-P (polished seat, no upholstery)
Price: £577.50 (Ex VAT)
£693.00 (Inc VAT)
Norton Wideline Alloy TL Seat Unit - Painted or Painted & Lined
The same spec as the NRP 107 WMA above but sprayed metallic silver, lined and laquered. The seat above has been upholstered in leather with red leather piping, it can also be upholstered in vinyl, with or without piping. If you would like any other colour, email or call us with your requirements.
NRP 0-0318 Sprayed metallic silver & clear coat laquer - no lines, no upholstery
Price: £699.00 (Ex VAT)
£838.80 (Inc VAT)
NRP 0-0319 Sprayed metallic silver, clear coat laquer - lined - no upholstery
Price: £789.00 (Ex VAT)
£946.80 (Inc VAT)
NRP 0-0318 Sprayed metallic silver & clear coat laquer - no lines, no upholstery
Price: £699.00 (Ex VAT)
£838.80 (Inc VAT)
NRP 0-0319 Sprayed metallic silver, clear coat laquer - lined - no upholstery
Price: £789.00 (Ex VAT)
£946.80 (Inc VAT)
Norton Wideline Seat Fitting Kit
This kit is for mounting our Norton Wideline Alloy Seat Units on 1950's road Wideline frames and comes with instructions for fitting.
The kit consists of:
2 x Profiled Frame Rubbers
2 x M8 x 5mm rubber washers
2 x M8 form C stainless plain washers
2 x M8 stainless nyloc nuts.
NRP 117 WMA
Price: £26.40 (Ex VAT)
£31.68 (Inc VAT)
The kit consists of:
2 x Profiled Frame Rubbers
2 x M8 x 5mm rubber washers
2 x M8 form C stainless plain washers
2 x M8 stainless nyloc nuts.
NRP 117 WMA
Price: £26.40 (Ex VAT)
£31.68 (Inc VAT)
Norton Wideline Weld In Seat Bracket
This is a new addition to our seat components range. This bracket is made from EN 3B steel and has been cut on the angle to suit perfectly the 1950's Norton road Wideline frame. This bracket has been slotted instead of being drilled, allowing for any slight misalignment when welding into the frame. This bracket is suitable for all of our Wideline seat units and will also accommodate some fibreglass seat units currently available on the market.
NRP 0-006
Price: £18.43 (Ex VAT)
£22.11 (Inc VAT)
NRP 0-006
Price: £18.43 (Ex VAT)
£22.11 (Inc VAT)
Open Cell Fuel Foam - for baffling fuel tanks
When fitted inside the fuel tank it acts as a baffle, dramatically reducing fuel surge, with much improved stability. When it comes to baffling it really is the only game in town. Professional racers insist on their tanks being fitted with ESF.
Explosion Suppressant Foam is a reticulated polyurethane foam and is used in fuel tanks where the possibility of fuel tank explosion exists . It has been used for over 30 years and has found thousands of successful applications in aircraft, boats, military vehicles, competition and emergency vehicles.
Once installed inside the fuel tank the reticulated polyurethane foam essentially functions as a three dimensional fire screen. The foam is 98% void and only reduces fuel volume by 4% and adds only a negligible amount of net weight to the fuel tank. The foam can be cut into cubes or rectangle lengths, and then pushed into the tank through the filler cap
Use a ratio of ²⁄₃ foam to the capacity of the tank, (i.e. 2 gallons of foam for a 3 gallon tank). This foam is suitable for E5 & E10 Petrol & Methanol.
Fuel Foam £15.00 (Ex VAT) per gallon
£18.00 (Inc VAT) per gallon
Explosion Suppressant Foam is a reticulated polyurethane foam and is used in fuel tanks where the possibility of fuel tank explosion exists . It has been used for over 30 years and has found thousands of successful applications in aircraft, boats, military vehicles, competition and emergency vehicles.
Once installed inside the fuel tank the reticulated polyurethane foam essentially functions as a three dimensional fire screen. The foam is 98% void and only reduces fuel volume by 4% and adds only a negligible amount of net weight to the fuel tank. The foam can be cut into cubes or rectangle lengths, and then pushed into the tank through the filler cap
Use a ratio of ²⁄₃ foam to the capacity of the tank, (i.e. 2 gallons of foam for a 3 gallon tank). This foam is suitable for E5 & E10 Petrol & Methanol.
Fuel Foam £15.00 (Ex VAT) per gallon
£18.00 (Inc VAT) per gallon
Norton & Triton Petrol Tank Lines
This is a black & red vinyl tank line application for the left hand side of our Norton Slimline & Wideline aluminium petrol tanks. Ideal for Tritons and Nortons. The black line is 12mm wide with a 4mm gap to a 2mm wide red line. Length 12¹⁄₂" x 5¹⁄₂" tall. The lines have been put onto a film paper for easy application. These lines are suitable for 2 pack paint.
NRP 100104
Price: £18.65 (Ex VAT)
£22.37 (Inc VAT)
Please note the vibrancy of the colours has been affected by the covering of film paper in the photo. Pictures of the lines fitted to our tanks will be added in the future.
NRP 100104
Price: £18.65 (Ex VAT)
£22.37 (Inc VAT)
Please note the vibrancy of the colours has been affected by the covering of film paper in the photo. Pictures of the lines fitted to our tanks will be added in the future.
Norton & Triton Gas Tank Lines - New shape lines back in stock
This is a black & red vinyl tank line application for the right hand side of our Norton Slimline & Wideline aluminium petrol tanks. Ideal for Tritons and Nortons. The black line is 12mm wide with a 4mm gap to a 2mm wide red line. Length 12 ¹⁄₂" x 5 ¹⁄₂" tall. The lines have been put onto a film paper for easy application. These lines are suitable for 2 pack paint.
NRP 100105
Price: £18.65 (Ex VAT)
£22.37 (Inc VAT)
Please note the vibrancy of the colours has been affected by the covering of film paper in the photo. Pictures of the lines fitted to our tanks will be added in the future.
NRP 100105
Price: £18.65 (Ex VAT)
£22.37 (Inc VAT)
Please note the vibrancy of the colours has been affected by the covering of film paper in the photo. Pictures of the lines fitted to our tanks will be added in the future.
Norton 5 Gallon Petrol Tank Lines
This is a black & red vinyl tank line application for the left and right hand sides of our Norton Slimline & Wideline 5 gallon aluminium petrol tanks. These lines are only suitable for our Norton 5 gallon tanks. The black line is 12mm wide with a 4mm gap to a 4mm wide red line. Length 410mm long by 170mm high. The lines have been put onto a film paper for easy application.
NRP 0-0123 (Left Hand Side)
Price: £22.00 (Ex VAT)
£26.40 (Inc VAT)
NRP 0-0124 (Right Hand Side)
Price: £22.00 (Ex VAT)
£26.40 (Inc VAT)
NRP 0-0123 (Left Hand Side)
Price: £22.00 (Ex VAT)
£26.40 (Inc VAT)
NRP 0-0124 (Right Hand Side)
Price: £22.00 (Ex VAT)
£26.40 (Inc VAT)
Vinyl Transfers for petrol tanks
Norton Vinyl Transfer, 1930 on
125 x 36 mm. Does not react with 2k lacquer.
Made in England
NRP 0-0122A
Price: £6.99 (Ex VAT)
£8.39 (Inc VAT)
Triton Vinyl Transfer,
115 x 43 mm. Does not react with 2k lacquer.
Made in England
NRP 4842B
Price: £5.49 (Ex VAT)
£6.59 (Inc VAT)
125 x 36 mm. Does not react with 2k lacquer.
Made in England
NRP 0-0122A
Price: £6.99 (Ex VAT)
£8.39 (Inc VAT)
Triton Vinyl Transfer,
115 x 43 mm. Does not react with 2k lacquer.
Made in England
NRP 4842B
Price: £5.49 (Ex VAT)
£6.59 (Inc VAT)
Norton Crossed Flags Vinyl Transfer
Norton crossed flags vinyl transfer, 116 x 50 mm.
Does not react with 2k lacquer.
Made in England
NRP 5118N
Price: £8.75 (Ex VAT)
£10.50 (Inc VAT)
Does not react with 2k lacquer.
Made in England
NRP 5118N
Price: £8.75 (Ex VAT)
£10.50 (Inc VAT)
Norton & Triton Alloy 2" Monza Cap
High quality polished aluminium 2" Monza Cap.
Made by Emgo
NRP 72033
Price: £39.55 (Ex VAT)
£47.45 (Inc VAT)
Made by Emgo
NRP 72033
Price: £39.55 (Ex VAT)
£47.45 (Inc VAT)
Norton & Triton Alloy 2¹⁄₂" Monza Cap
High quality polished aluminium 2 ¹⁄₂" Monza Cap
Made by Emgo
NRP 72034
Price: £49.45 (Ex VAT)
£59.33 (Inc VAT)
Made by Emgo
NRP 72034
Price: £49.45 (Ex VAT)
£59.33 (Inc VAT)
Norton Brass ¹⁄₄" BSP Racing Fuel Tap
12 month warranty
This is an all brass race fuel tap. The valve is a tapered type with no rubber seals and re-seats itself every time it's turned on and off. No filters are used, if filters are required, inline filters should be fitted outside the tank.
This tap is suitable for methanol and petrol. Use NRP 915602 ¹⁄₄" BSP Dowty Washer for this tap. We also advise using one of our NRP 505137C Mini Petrol Hose Clips for your fuel pipe shown a little further down the page.
BTM 14
Price: £25.00 (Ex VAT)
£30.00 (Inc VAT)
This is an all brass race fuel tap. The valve is a tapered type with no rubber seals and re-seats itself every time it's turned on and off. No filters are used, if filters are required, inline filters should be fitted outside the tank.
This tap is suitable for methanol and petrol. Use NRP 915602 ¹⁄₄" BSP Dowty Washer for this tap. We also advise using one of our NRP 505137C Mini Petrol Hose Clips for your fuel pipe shown a little further down the page.
BTM 14
Price: £25.00 (Ex VAT)
£30.00 (Inc VAT)
Norton Chrome Plated Racing Brass ¹⁄₄" BSP Fuel Tap
This is a race type fuel tap and has a 5 mm bore suitable for petrol and methanol. No filters are fitted to this tap. It measures from end to end 33 mm. NRP 73027 spigot and NRP 73022 ¹⁄₄" BSP Nut can be used with this tap allowing it to take an 8 mm (⁵⁄₁₆") i.d. fuel hose.
CTM 5
Price: £25.00 (Ex VAT)
£30.00 (Inc VAT)
CTM 5
Price: £25.00 (Ex VAT)
£30.00 (Inc VAT)
Norton ¹⁄₄" BSP Petrol Tap - Fits Norton/Triumph (Ideal for the USA)
¹⁄₄" x ¹⁄₄" BSP Chrome flat lever with filter (Main) On/Off. Supplied with New highest quality Ethanol resistant Viton seals, ideal for countries with E5 & E10 fuel.
NRP 73091
Price: £16.70 (Ex VAT)
£20.04 (Inc VAT)
NRP 73091
Price: £16.70 (Ex VAT)
£20.04 (Inc VAT)
Norton ¹⁄₄" BSP Petrol Tap - Fits Norton/Triumph (Ideal for the USA)
¹⁄₄" x ¹⁄₄" BSP Chrome flat lever with filter and locknut. Off/Reserve. Supplied with New highest quality Ethanol resistant Viton seals, ideal for countries with E5 & E10 fuel.
NRP 73092
Price: £16.70 (Ex VAT)
£20.04 (Inc VAT)
NRP 73092
Price: £16.70 (Ex VAT)
£20.04 (Inc VAT)
Norton Petrol Tap Fits Norton & Triumph ¹⁄₄" BSP
On/Off fuel tap with filter and locknut, BAP type. Fitted to Commando & T140 (1979).
Made in Europe.
OEM: 60-7266
NRP 27728
Price: £15.71 (Ex VAT)
£18.85 (Inc VAT)
Made in Europe.
OEM: 60-7266
NRP 27728
Price: £15.71 (Ex VAT)
£18.85 (Inc VAT)
Norton Petrol Tap Fits Norton & Triumph ¹⁄₄" BSP
Reserve/Off with filter and locknut, BAP type.
Fitted to Commando & T140 (1979-).
Made in Europe
OEM: 60-7267
NRP 27729
Price: £15.71 (Ex VAT)
£18.85 (Inc VAT)
Fitted to Commando & T140 (1979-).
Made in Europe
OEM: 60-7267
NRP 27729
Price: £15.71 (Ex VAT)
£18.85 (Inc VAT)
Norton Nickel Plated Brass Fuel Tap ¹⁄₄" BSP with Filter
¹⁄₄" x ¹⁄₄" BSP round lever type fuel tap, with filter. Premium quality fuel tap, CNC machined brass components with superb bright nickel plating. Stainless Steel filter gauze with internal anti-crush cage. New unique ball valve insert ensures this tap is resistant to E 10 unleaded fuels.
Made in England.
NRP 73084 N
Price: £25.46 (Ex VAT)
£30.55 (Inc VAT)
Made in England.
NRP 73084 N
Price: £25.46 (Ex VAT)
£30.55 (Inc VAT)
Norton Alloy In Line Fuel Filter
This is a new addition to our range. This fuel filter can be unscrewed and cleaned at any time. It is machined from aluminium and anodised in black, with 8 mm inlet and outlet spigots. This filter is ideal to use with the confined space taps above or any tap that is not filtered. The picture shows the filter disassembled on the left and assembled on the right.
Outside Diameter - 28 mm
Total Length - 50 mm
NRP 330 P
Price: £22.00 (Ex VAT) each
£26.40 (Inc VAT) each
Outside Diameter - 28 mm
Total Length - 50 mm
NRP 330 P
Price: £22.00 (Ex VAT) each
£26.40 (Inc VAT) each
Norton 90 Degree Elbow With ¹⁄₄" BSP (Gas)
90 degree elbow with ¹⁄₄" - 6 mm spigot & BSP gas nut in one piece.
NRP 73051A
Price: £5.76 (Ex VAT)
£6.92 (Inc VAT)
NRP 73051A
Price: £5.76 (Ex VAT)
£6.92 (Inc VAT)
Norton ¹⁄₄" Fuel Pipe Spigot
Fuel pipe spigot for ¹⁄₄" gas nut. Fits ¹⁄₄" - 6 mm bore fuel pipe.
NRP 73027A
Price: £2.13 (Ex VAT)
£2.56 (Inc VAT)
NRP 73027A
Price: £2.13 (Ex VAT)
£2.56 (Inc VAT)
Norton Fuel Pipe Spigot 5/16"
Straight line fuel pipe spigot for 5/16" (8mm) pipe. Comes with gas nut
NRP 73035
Price: £3.25 (Ex VAT)
£3.90 (Inc VAT)
NRP 73035
Price: £3.25 (Ex VAT)
£3.90 (Inc VAT)
Norton BSP Nut (Gas) ¹⁄₄"
Suitable for securing ¹⁄₄" - 6 mm & ⁵⁄₁₆" - 8 mm fuel spigot. Will fit Norton, Triumph and other motorcycles.
NRP 73022A
Price: £1.85 (Ex VAT)
£2.22 (Inc VAT)
NRP 73022A
Price: £1.85 (Ex VAT)
£2.22 (Inc VAT)
Norton Fuel Pipe Spigot ⁵⁄₁₆" 8 mm
Brass 45 Degree fuel fitting for Norton, Triumph and other motorcycles, this spigot comes with a ¹⁄₄" BSP Gas nut. ⁵⁄₁₆" - 8 mm 0.d. Suitable for ⁵⁄₁₆" - 8 mm fuel pipe.
NRP 73037
Price: £4.16 (Ex VAT)
£4.99 (Inc VAT)
NRP 73037
Price: £4.16 (Ex VAT)
£4.99 (Inc VAT)
Norton Fuel Pipe Spigot ⁵⁄₁₆" 8 mm
Brass 90 Degree fuel fitting for Norton, Triumph and other motorcycles, this spigot can be used with NRP 73022A ¹⁄₄" BSP nut. ⁵⁄₁₆" - 8 mm 0.d. Suitable for ⁵⁄₁₆" - 8 mm fuel pipe.
NRP 73036
Price: £4.69 (Ex VAT)
£5.63 (Inc VAT)
NRP 73036
Price: £4.69 (Ex VAT)
£5.63 (Inc VAT)
Norton Fuel/Oil Hose Clips (All Stainless)
Suitable for petrol hose and oil feed and return pipes.
9-11 mm Hose Clip - suitable for ³⁄₁₆" (4.8 mm) i.d. hose
NRP 0911 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
10-12 mm Hose Clip - suitable for ¹⁄₄" (6.3 mm) i.d. Goodridge hose
NRP 1012 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
11-13 mm Hose Clip - suitable for ¹⁄₄" (6.3 mm) i.d. rubber hose
NRP 1113 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
13-15 mm Hose Clip - suitable for ⁵⁄₁₆" (8 mm) i.d. hose (rubber and Goodridge)
NRP 1315 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
14-16 mm Hose Clip - suitable for ³⁄₈" (9.5 mm) i.d. Goodridge hose
NRP 1416 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
15-17 mm Hose Clip - suitable for ³⁄₈" (9.5 mm) i.d. rubber hose
NRP 1517 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
9-11 mm Hose Clip - suitable for ³⁄₁₆" (4.8 mm) i.d. hose
NRP 0911 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
10-12 mm Hose Clip - suitable for ¹⁄₄" (6.3 mm) i.d. Goodridge hose
NRP 1012 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
11-13 mm Hose Clip - suitable for ¹⁄₄" (6.3 mm) i.d. rubber hose
NRP 1113 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
13-15 mm Hose Clip - suitable for ⁵⁄₁₆" (8 mm) i.d. hose (rubber and Goodridge)
NRP 1315 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
14-16 mm Hose Clip - suitable for ³⁄₈" (9.5 mm) i.d. Goodridge hose
NRP 1416 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
15-17 mm Hose Clip - suitable for ³⁄₈" (9.5 mm) i.d. rubber hose
NRP 1517 ST
Price: £1.64 (Ex VAT)
£1.97 (Inc VAT)
Norton Fuel & Oil Hose Clip (Zinc Plated) 13 - 15mm
13-15mm Hose Clip. Suitable for petrol hose and oil feed and return pipes.
NRP 1315 ZP
Price: £0.66 (Ex VAT)
£0.79 (Inc VAT)
NRP 1315 ZP
Price: £0.66 (Ex VAT)
£0.79 (Inc VAT)
Norton Mini Petrol Hose Clip (zinc plated)
Petrol hose clip, fits 11-19mm hose, band width 5mm.
NRP 505137 C
Price: £0.82 (Ex VAT)
£0.98 (Inc VAT)
NRP 505137 C
Price: £0.82 (Ex VAT)
£0.98 (Inc VAT)
Norton BSP x 20g Copper Washer ¹⁄₄"
Copper washer suitable for fuel taps
NRP 915458
Price: £0.35 (Ex VAT)
£0.42 (Inc VAT)
NRP 915458
Price: £0.35 (Ex VAT)
£0.42 (Inc VAT)
Norton BSP Dowty Washer ¹⁄₄"
Dowty sealing washer suitable for fuel taps.
NRP 915602
Price: £0.52 (Ex VAT)
£0.62 (Inc VAT)
NRP 915602
Price: £0.52 (Ex VAT)
£0.62 (Inc VAT)
Norton Rubber Fuel/Oil Hose
Suitable for rocker feed, sold in 1 metre lengths.
³⁄₁₆" (5 mm) i.d. Fuel/Oil Hose
NRP 605105
Price: £3.61 (Ex VAT) per metre
£4.33 (Inc VAT)
Suitable for unleaded or rocker feed, sold in 1 metre lengths.
¹⁄₄" (6.3 mm) i.d. Fuel/Oil Hose
NRP 605106
Price: £3.97 (Ex VAT) per metre
£4.76 (Inc VAT) per metre
Suitable for unleaded, sold in 1 metre lengths.
⁵⁄₁₆" (8 mm) i.d. x 15 mm o.d. Fuel/Oil Hose
NRP 605107
Price: £4.03 (Ex VAT) per metre
£4.84 (Inc VAT) per metre
Suitable for unleaded, sold in 1 metre lengths.
³⁄₈" (9.5 mm) i.d. Fuel/Oil Hose
NRP 605108
Price: £4.61 (Ex VAT) per metre
£5.53 (Inc VAT) per metre
Norton Overbraided Rubber Fuel/Oil Hose
Suitable for rocker oil feed. Sold in 1 metre lengths.
³⁄₁₆" (5 mm) i.d. Fuel/Oil Hose.
NRP 605142
Price: £4.24 (Ex VAT)
£5.09 (Inc VAT)
Suitable for unleaded fuel, rocker oil feed and vent pipe for our 5 gallon petrol tanks and oil tanks. Sold in 1 metre lengths.
¹⁄₄" (6 mm) i.d. Fuel/Oil Hose.
NRP 605143
Price: £5.39 (Ex VAT)
£6.47 (Inc VAT)
Suitable for unleaded fuel. Sold in 1 metre lengths.
⁵⁄₁₆" (8 mm) i.d. x 15 mm o.d. Fuel/Oil Hose
NRP 605145
Price: £6.01 (Ex VAT)
£7.21 (Inc VAT)
³⁄₁₆" (5 mm) i.d. Fuel/Oil Hose.
NRP 605142
Price: £4.24 (Ex VAT)
£5.09 (Inc VAT)
Suitable for unleaded fuel, rocker oil feed and vent pipe for our 5 gallon petrol tanks and oil tanks. Sold in 1 metre lengths.
¹⁄₄" (6 mm) i.d. Fuel/Oil Hose.
NRP 605143
Price: £5.39 (Ex VAT)
£6.47 (Inc VAT)
Suitable for unleaded fuel. Sold in 1 metre lengths.
⁵⁄₁₆" (8 mm) i.d. x 15 mm o.d. Fuel/Oil Hose
NRP 605145
Price: £6.01 (Ex VAT)
£7.21 (Inc VAT)
Goodridge Stainless Steel Braided Fuel Hose
Goodridge stainless steel single braided rubber hose suitable for oil, petrol and methanol. Goodridge stainless steel finishers (jubilee-type clips with outer nut cover) are sold separately from the fuel hose. These hoses are sold by the metre.
¹⁄₄" (6.7 mm) - NRP 20204 - Price: £20.69 (Ex VAT), £24.83 (Inc VAT)
⁵⁄₁₆" (7.9 mm) - NRP 20205 - Price: £20.69 (Ex VAT), £24.83 (Inc VAT)
³⁄₈" (9.5 mm) - NRP 20206 - Price: £20.69 (Ex VAT), £24.83 (Inc VAT)
Stainless steel finishers for ¹⁄₄" (6.7mm):
NRP 93604 - Price £19.78 (Ex VAT), £23.73 (Inc VAT)
Stainless steel finishers for ⁵⁄₁₆" (7.9 mm) and ³⁄₈" (9.5 mm):
NRP 93606 - Price £9.35 (Ex VAT), £11.22 (Inc VAT)
Norton & Triton Chrome Universal Tapered Air Filter
Used and endorsed by the most succesful team in U.S. endurance race history, Team Suzuki Endurance. A really nice bit of kit, and is available in 6 sizes.
NRP 55739 - 39mm inlet
NRP 90622 - 42mm inlet (fits 376/600 carburettors)
NRP 90623 - 48mm inlet (fits 389/900 carburettors)
NRP 55752 - 52mm inlet
NRP 55754 - 54mm inlet (fits 2900 MKII)
NRP 55760 - 60mm inlet
Price: £12.07 (Ex VAT) each
£14.48 (Inc VAT) each
NRP 55739 - 39mm inlet
NRP 90622 - 42mm inlet (fits 376/600 carburettors)
NRP 90623 - 48mm inlet (fits 389/900 carburettors)
NRP 55752 - 52mm inlet
NRP 55754 - 54mm inlet (fits 2900 MKII)
NRP 55760 - 60mm inlet
Price: £12.07 (Ex VAT) each
£14.48 (Inc VAT) each
Amal Rubber Stub Adaptor
Rubber stub adaptor for 2900 Amal carburettors. These rubber adaptors fit onto the manifolds shown below allowing the MKII Amal carburettors to fit straight on. These adaptors fit over a 40mm stub. OEM: 2928/123
NRP 90594
Price: £7.61 (Ex VAT)
£9.13 (Inc VAT)
NRP 90594
Price: £7.61 (Ex VAT)
£9.13 (Inc VAT)
Norton & Triton Aluminium Angled Inlet Manifold
Angled 30mm bore, 2'' hole centres. This manifold enables the fitting of a MkII concentric carburettor to machines using the Mk1 series as original equipment.
This manifold has a 40mm o.d. stub.
OEM: 2930/114
NRP 90630
Price: £20.09 (Ex VAT)
£24.10 (Inc VAT)
Polished manifolds available on request:
NRP 90630 P
Price: £40.00 (Ex VAT)
£48.00 (Inc VAT)
This manifold has a 40mm o.d. stub.
OEM: 2930/114
NRP 90630
Price: £20.09 (Ex VAT)
£24.10 (Inc VAT)
Polished manifolds available on request:
NRP 90630 P
Price: £40.00 (Ex VAT)
£48.00 (Inc VAT)
Norton & Triton Aluminium Straight Inlet Manifold
Straight 32mm bore, 2'' hole centres. This manifold enables the fitting of a MkII concentric carburettor to machines using the Mk1 series as original equipment. This manifold has a 40mm o.d. stub.
OEM: 2932/116
NRP 90635
Price: £18.19 (Ex VAT)
£21.83 (Inc VAT)
OEM: 2932/116
NRP 90635
Price: £18.19 (Ex VAT)
£21.83 (Inc VAT)
Norton & Triton Aluminium Straight Inlet Manifold
Straight 34mm, 2'' hole centres. This manifold enables the fitting of a MkII concentric carburettor to machines using the MkI series as original equipment. This manifold has a 40mm o.d. stub.
OEM: 2934/116
NRP 90636
Price: £18.19 (Ex VAT)
£21.83 (Inc VAT)
OEM: 2934/116
NRP 90636
Price: £18.19 (Ex VAT)
£21.83 (Inc VAT)
Norton & Triton Alloy Manifold - available in 26mm, 30mm & 32mm
Finned type Alloy Manifold machined from Solid Alloy Billet. Premium quality 2" stud centres suitable for standard Amal concentric and monobloc carburettor mounting. Gives improved Cylinder Filling at high R.P.M., while finned alloy construction improves heat dissipation allowing the fuel mixture to cool more efficiently. Ideal for Norton and Triumph twins. Made in England.
Thickness : 25mm
Material : Solid Billet Alloy
Bore Sizes: 26mm - NRP 90911
30mm - NRP 90912
32mm - NRP 90913
Price: £38.81 (Ex VAT) each
£46.57 (Inc VAT) each
Thickness : 25mm
Material : Solid Billet Alloy
Bore Sizes: 26mm - NRP 90911
30mm - NRP 90912
32mm - NRP 90913
Price: £38.81 (Ex VAT) each
£46.57 (Inc VAT) each
Norton & Triton Float Chamber Extension
Premium Quality Finned Alloy Float Chamber Extension for Monobloc carburettors.
Ideal for Nortons and Triumphs that require additional fuel capacity.
NRP 90910
Price: £33.21 (Ex VAT)
£39.85 (Inc VAT)
Ideal for Nortons and Triumphs that require additional fuel capacity.
NRP 90910
Price: £33.21 (Ex VAT)
£39.85 (Inc VAT)
Amal Carburettors and service parts
We can supply carburettors and parts for the following, 600 / 900 Mk I concentric, - 2900 MkII concentric, there are too many parts to list, but you can identify which parts you need from the parts drawings shown below. Please phone for prices or help.
AMAL 600/900 MKI
The Concentric float chamber functions satisfactorily at a downdraught angle of 40 degrees, and also gives greatly increased side tip angle without affecting carburation. Right hand carburettors are supplied as standard with the tickler, throttle stop and pilot air adjustment positioned on the right hand side as viewed from the air intake end.
Left hand carburettors have all of the above on the left hand side as viewed from the air intake end.
Carburettors are normally supplied with an air valve which is operated by cable from the handlebar position. If the air valve is not required it can be omitted and the mixing chamber top sealed of with a plug screw.
Available bore sizes in 600 series in right and left hand
22mm - 4 stroke
24mm - 4 stroke
26mm - 4 stroke
26mm - 2 stroke
Available bore sizes in 900 series in right and left hand
28mm - 4 stroke
30mm - 4 stroke
32mm - 4 stroke
Commando 850 32mm - 932/36 L/Hand & 932/35 R/Hand
Carburettors are available for petrol and methanol.
Left hand carburettors have all of the above on the left hand side as viewed from the air intake end.
Carburettors are normally supplied with an air valve which is operated by cable from the handlebar position. If the air valve is not required it can be omitted and the mixing chamber top sealed of with a plug screw.
Available bore sizes in 600 series in right and left hand
22mm - 4 stroke
24mm - 4 stroke
26mm - 4 stroke
26mm - 2 stroke
Available bore sizes in 900 series in right and left hand
28mm - 4 stroke
30mm - 4 stroke
32mm - 4 stroke
Commando 850 32mm - 932/36 L/Hand & 932/35 R/Hand
Carburettors are available for petrol and methanol.
AMAL 2600 / 2900 / 2000 SERIES MKII
All parts and carburettors available for left and right hand.
Bore sizes available
30mm - 4 stroke
32mm - 4 stroke
34mm - 4 stroke
Petrol and methanol carburettors are available.
Smooth bores available in 34mm.
Bore sizes available
30mm - 4 stroke
32mm - 4 stroke
34mm - 4 stroke
Petrol and methanol carburettors are available.
Smooth bores available in 34mm.
Amal MKII Carburettor gasket set
Packaged set of good quality non-genuine gaskets, washers and 'O' rings to service MkII Amal carburettors.
OEM: 2622/144
NRP 90178
Price: £4.38 (Ex VAT)
£5.25 (Inc VAT)
OEM: 2622/144
NRP 90178
Price: £4.38 (Ex VAT)
£5.25 (Inc VAT)
Wassel 9 Series Carburettors for Dominators
Right hand, 30mm bore, 4 stroke.
Fully adjustable float fitted as standard!
Passivated corrosion and fuel stain resistant finish!
Carburettor Range : Wassell 9 Series
Main Jet: 200
Throttle Slide No: 3
Pilot Jet: Bush
Needle Jet: 106
Left hand carburettor -
NRP 90450L
OEM: 930/301,9/30L
Price: £81.26 (Ex VAT)
£97.51 (Inc VAT)
Right hand carburettor -
NRP 90451R
OEM: 930/300,9/30R
Price: £81.26 (Ex VAT)
£97.51 (Inc VAT)
# A range of Jets, Needle Jets & Slides are available to suit your engine set up, please email if you have any questions #
Fully adjustable float fitted as standard!
Passivated corrosion and fuel stain resistant finish!
Carburettor Range : Wassell 9 Series
Main Jet: 200
Throttle Slide No: 3
Pilot Jet: Bush
Needle Jet: 106
Left hand carburettor -
NRP 90450L
OEM: 930/301,9/30L
Price: £81.26 (Ex VAT)
£97.51 (Inc VAT)
Right hand carburettor -
NRP 90451R
OEM: 930/300,9/30R
Price: £81.26 (Ex VAT)
£97.51 (Inc VAT)
# A range of Jets, Needle Jets & Slides are available to suit your engine set up, please email if you have any questions #
Wassel 9 Series Carburettors for Commandos
Wassell 9 Series carburettor, specifically jetted for Commando.
Right Hand, 32mm bore.
Fully adjustable float fitted as standard!
Passivated corrosion and fuel stain resistant finish!
Range : Wassell 9 Series
Main Jet: 260
Throttle Slide: 3.5
Pilot Jet: Bush
Needle Jet: 106
Left hand carburettor -
NRP 90466L
OEM: L932/35,9/32NL
Price: £81.26 (Ex VAT)
£97.51 (Inc VAT)
Right hand carburettor -
NRP 90467R
OEM: R932/36,9/32NR
Price: £81.26 (Ex VAT)
£97.51 (Inc VAT)
# A range of Jets, Needle Jets & Slides are available to suit your engine set up, please email if you have any questions #
Right Hand, 32mm bore.
Fully adjustable float fitted as standard!
Passivated corrosion and fuel stain resistant finish!
Range : Wassell 9 Series
Main Jet: 260
Throttle Slide: 3.5
Pilot Jet: Bush
Needle Jet: 106
Left hand carburettor -
NRP 90466L
OEM: L932/35,9/32NL
Price: £81.26 (Ex VAT)
£97.51 (Inc VAT)
Right hand carburettor -
NRP 90467R
OEM: R932/36,9/32NR
Price: £81.26 (Ex VAT)
£97.51 (Inc VAT)
# A range of Jets, Needle Jets & Slides are available to suit your engine set up, please email if you have any questions #
Wassell 6 & 9 Series carburettor parts list
Email for price on parts.
# We can supply your carburettor to your jet and slide requirements. #
# We can supply premium quality 9 series zinc plated brass slides as a direct replacement for MK I Carburettors. #
# We can supply your carburettor to your jet and slide requirements. #
# We can supply premium quality 9 series zinc plated brass slides as a direct replacement for MK I Carburettors. #
Norton & Triton Short Velocity Stack
Short Velocity stack (standard) for 9 Series carburettors - Polished
OEM: 928/066,9/066
NRP 90419
Price Each: £7.22 (Ex VAT)
£8.66 (Inc VAT)
OEM: 928/066,9/066
NRP 90419
Price Each: £7.22 (Ex VAT)
£8.66 (Inc VAT)
Norton & Triton Velocity Stack
CNC Custom made, aluminium Velocity stack for 2000 series carburettors, matched for optimum air flow. Ideal for racing and high performance applications.
OEM: 2036/126 Velocity
NRP 90532
Price: £25.25 (Ex VAT)
£30.29 (Inc VAT)
Velocity stack for 2900 Amal carburettors for road engines, 28 - 34mm
OEM 2928/126
NRP 90597
Price: £27.45 (Ex VAT)
£32.93 (Inc VAT)
OEM: 2036/126 Velocity
NRP 90532
Price: £25.25 (Ex VAT)
£30.29 (Inc VAT)
Velocity stack for 2900 Amal carburettors for road engines, 28 - 34mm
OEM 2928/126
NRP 90597
Price: £27.45 (Ex VAT)
£32.93 (Inc VAT)
#All of our alloy oil tanks have threaded Monza cap mounting bosses welded into the tank and the Monza caps are screwed on, not bonded.#
Norton Slimline Alloy Oil Tanks - Standard & Premium
Norton Slimline Alloy Oil Tank For Pre-Unit Engines Standard Type
24 month warranty
This is our new standard Norton Slimline alloy oil tank for Norton & Triumph Triton pre-unit engines. The standard oil tank has one breather. We have increased the amount of holes in the return pipe to reduce air bubbles in the oil, the oil now dribbles back to tank. This new design is made from two pieces of aluminium and formed on our special tooling, this gives fantastic accuracy, allowing us to introduce tank lines that will fit perfectly every time. The oil feed sealing washers, banjo's & oil filter bolts are available from us. ( Oil Filter Bolt NRP 061159F plated steel or stainless - Banjo NRP 0-0110 - Sealing washers NRP 042065 ) See further down the page for the oil tank fitting kit NRP 0-0011R.
The oil tank has a maximum capacity of 3 litres. The tank sides have been formed to follow the curved form of the frame giving a uniform look. When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
Overbraided breather hose NRP 605143 ¹⁄₄" (6 mm) i.d. should be used for the vent pipe on top of the oil tank.
This oil tank is also available with a drain bung for easy draining of the oil from the tank, which can be coupled with one of our Remote Drain Blocks for easy mess free oil changes.
Norton Remote Drain Blocks are available for all of our Norton alloy oil tanks, please see NRP 0-0153 further down the page. If you want to use a Norton alloy oil tank platform for a Pre-Unit oil tank with a drain bung, please use NRP 0-002 Norton alloy oil tank platform further down the page.
All of our Norton alloy oil tanks come with fitting instructions.
Pictures of polished & painted oil tanks will be added in due course.
NRP 2001 R (raw - not polished, no drain bung) ** In stock now
Price: £315.00 (Ex VAT)
£378.00 (Inc VAT)
NRP 2001 RB (raw - not polished, with drain bung)
Price: £339.00 (Ex VAT)
£406.80 (Inc VAT)
This is our new standard Norton Slimline alloy oil tank for Norton & Triumph Triton pre-unit engines. The standard oil tank has one breather. We have increased the amount of holes in the return pipe to reduce air bubbles in the oil, the oil now dribbles back to tank. This new design is made from two pieces of aluminium and formed on our special tooling, this gives fantastic accuracy, allowing us to introduce tank lines that will fit perfectly every time. The oil feed sealing washers, banjo's & oil filter bolts are available from us. ( Oil Filter Bolt NRP 061159F plated steel or stainless - Banjo NRP 0-0110 - Sealing washers NRP 042065 ) See further down the page for the oil tank fitting kit NRP 0-0011R.
The oil tank has a maximum capacity of 3 litres. The tank sides have been formed to follow the curved form of the frame giving a uniform look. When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
Overbraided breather hose NRP 605143 ¹⁄₄" (6 mm) i.d. should be used for the vent pipe on top of the oil tank.
This oil tank is also available with a drain bung for easy draining of the oil from the tank, which can be coupled with one of our Remote Drain Blocks for easy mess free oil changes.
Norton Remote Drain Blocks are available for all of our Norton alloy oil tanks, please see NRP 0-0153 further down the page. If you want to use a Norton alloy oil tank platform for a Pre-Unit oil tank with a drain bung, please use NRP 0-002 Norton alloy oil tank platform further down the page.
All of our Norton alloy oil tanks come with fitting instructions.
Pictures of polished & painted oil tanks will be added in due course.
NRP 2001 R (raw - not polished, no drain bung) ** In stock now
Price: £315.00 (Ex VAT)
£378.00 (Inc VAT)
NRP 2001 RB (raw - not polished, with drain bung)
Price: £339.00 (Ex VAT)
£406.80 (Inc VAT)
Norton Slimline Alloy Oil Tank For Pre-Unit Engines - Polished Standard Type
24 month warranty
This is our new standard Norton Slimline polished alloy oil tank for Norton & Triumph Triton pre-unit engines. Same spec as the raw NRP 2001 oil tank above. Available with our Norton oil tank lines. Also available with or without an oil drain bung as well, pictures to follow in due course.
NRP 2001 P (polished, no drain bung) # in stock #
Price: £347.00 (Ex VAT)
£416.40 (Inc VAT)
NRP 2001 PB (polished, with drain bung)
Price: £371.00 (Ex VAT)
£445.20 (Inc VAT)
NRP 2001 P - Lined (polished, no drain bung, with tank lines)
Price: £385.00 (Ex VAT)
£462.00 (Inc VAT)
NRP 2001 PB - Lined (polished, with drain bung & tank lines)
Price: £410.00 (Ex VAT)
£492.00 (Inc VAT)
This is our new standard Norton Slimline polished alloy oil tank for Norton & Triumph Triton pre-unit engines. Same spec as the raw NRP 2001 oil tank above. Available with our Norton oil tank lines. Also available with or without an oil drain bung as well, pictures to follow in due course.
NRP 2001 P (polished, no drain bung) # in stock #
Price: £347.00 (Ex VAT)
£416.40 (Inc VAT)
NRP 2001 PB (polished, with drain bung)
Price: £371.00 (Ex VAT)
£445.20 (Inc VAT)
NRP 2001 P - Lined (polished, no drain bung, with tank lines)
Price: £385.00 (Ex VAT)
£462.00 (Inc VAT)
NRP 2001 PB - Lined (polished, with drain bung & tank lines)
Price: £410.00 (Ex VAT)
£492.00 (Inc VAT)
Norton Slimline Alloy Oil Tank For Pre-Unit Engines - Painted Standard Type
24 month warranty
Same specification as the NRP 2001 P above. We now have paint shop facilities and we are able to offer this tank painted, lined and lacquered as shown in the pictures. All of our sprayed products are oven cured and are lacquered with two pack paint.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
NRP 2001 S (single colour paint, no lines, no drain bung)
Price: £465.00 (Ex VAT)
£558.00 (Inc VAT)
NRP 2001 SB (single colour paint, no lines, with drain bung)
Price: £490.00 (Ex VAT)
£588.00 (Inc VAT)
NRP 2001 PL (painted & lined, no drain bung)
Price: £561.00 (Ex VAT)
£673.20 (Inc VAT)
NRP 2001 PLB (painted & lined with drain bung)
Price: £585.00 (Ex VAT)
£702.00 (Inc VAT)
Same specification as the NRP 2001 P above. We now have paint shop facilities and we are able to offer this tank painted, lined and lacquered as shown in the pictures. All of our sprayed products are oven cured and are lacquered with two pack paint.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
NRP 2001 S (single colour paint, no lines, no drain bung)
Price: £465.00 (Ex VAT)
£558.00 (Inc VAT)
NRP 2001 SB (single colour paint, no lines, with drain bung)
Price: £490.00 (Ex VAT)
£588.00 (Inc VAT)
NRP 2001 PL (painted & lined, no drain bung)
Price: £561.00 (Ex VAT)
£673.20 (Inc VAT)
NRP 2001 PLB (painted & lined with drain bung)
Price: £585.00 (Ex VAT)
£702.00 (Inc VAT)
Norton Slimline Alloy Oil Tank For Pre-Unit Engines Premium Type
24 month warranty
This is our premium Norton Slimline alloy oil tank for Norton & Triumph Triton pre-unit engines. The premium oil tank has two breathers to allow the engine to breath into the oil tank. The breathers are located on the right hand side for easier routing. We have welded in an internal breather baffle in line with all our premium oil tanks. We have increased the amount of holes in the return pipe to reduce air bubbles in the oil, the oil now dribbles back to tank. This oil tank is made from two pieces of aluminium and formed on our special tooling, this gives fantastic accuracy, allowing us to introduce tank lines that will fit perfectly every time. The oil feed sealing washers, banjo's & oil filter bolts are available from us. (Oil Filter Bolt NRP 061159F plated steel or stainless - Banjo NRP 0-0110 - Sealing washers NRP 042065 ) See further down the page for the oil tank fitting kit NRP 0-0011R.
The oil tank has a maximum capacity of 3 litres. The tank sides have been formed to follow the curved form of the frame giving a uniform look. When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
Breather Kits and Step Up Adaptors now available, see NRP 0-0078 and NRP 0-0072.
This oil tank is also available with a drain bung for easy draining of the oil from the tank, which can be coupled with one of our Norton Remote Drain Blocks for easy mess free oil changes.
Norton Remote Drain Blocks are available for all of our Norton alloy oil tanks, please see NRP 0-0153 further down the page. If you want to use a Norton alloy oil tank platform for a Pre-Unit Norton alloy oil tank with a drain bung, please use NRP 0-002 Norton alloy oil tank platform further down the page.
All of our Norton alloy oil tanks come with fitting instructions.
NRP 1001 R (raw - not polished, no drain bung) ** In stock now
Price: £379.00 (Ex VAT)
£454.80 (Inc VAT)
NRP 1001 RB (raw - not polished, with drain bung)
Price: £397.00 (Ex VAT)
£476.40 (Inc VAT)
NRP 1001 P (polished - no drain bung)
Price: £410.00 (Ex VAT)
£492.00 (Inc VAT)
NRP 1001 PB (polished - with drain bung)
Price: £428.00 (Ex VAT)
£413.60 (Inc VAT)
This is our premium Norton Slimline alloy oil tank for Norton & Triumph Triton pre-unit engines. The premium oil tank has two breathers to allow the engine to breath into the oil tank. The breathers are located on the right hand side for easier routing. We have welded in an internal breather baffle in line with all our premium oil tanks. We have increased the amount of holes in the return pipe to reduce air bubbles in the oil, the oil now dribbles back to tank. This oil tank is made from two pieces of aluminium and formed on our special tooling, this gives fantastic accuracy, allowing us to introduce tank lines that will fit perfectly every time. The oil feed sealing washers, banjo's & oil filter bolts are available from us. (Oil Filter Bolt NRP 061159F plated steel or stainless - Banjo NRP 0-0110 - Sealing washers NRP 042065 ) See further down the page for the oil tank fitting kit NRP 0-0011R.
The oil tank has a maximum capacity of 3 litres. The tank sides have been formed to follow the curved form of the frame giving a uniform look. When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
Breather Kits and Step Up Adaptors now available, see NRP 0-0078 and NRP 0-0072.
This oil tank is also available with a drain bung for easy draining of the oil from the tank, which can be coupled with one of our Norton Remote Drain Blocks for easy mess free oil changes.
Norton Remote Drain Blocks are available for all of our Norton alloy oil tanks, please see NRP 0-0153 further down the page. If you want to use a Norton alloy oil tank platform for a Pre-Unit Norton alloy oil tank with a drain bung, please use NRP 0-002 Norton alloy oil tank platform further down the page.
All of our Norton alloy oil tanks come with fitting instructions.
NRP 1001 R (raw - not polished, no drain bung) ** In stock now
Price: £379.00 (Ex VAT)
£454.80 (Inc VAT)
NRP 1001 RB (raw - not polished, with drain bung)
Price: £397.00 (Ex VAT)
£476.40 (Inc VAT)
NRP 1001 P (polished - no drain bung)
Price: £410.00 (Ex VAT)
£492.00 (Inc VAT)
NRP 1001 PB (polished - with drain bung)
Price: £428.00 (Ex VAT)
£413.60 (Inc VAT)
Norton Slimline Alloy Oil Tank, Pre-Unit Engines, Polished & Lined Premium Type
This is a new addition to our range. Same spec above with tank lines.
NRP 1001 P - Lined (polished, no drain bung, with tank lines)
Price: £448.00 (Ex VAT)
£537.60 (Inc VAT)
NRP 1001 PB - Lined (polished, with drain bung & tank lines)
Price: £466.00 (Ex VAT)
£559.20 (Inc VAT)
NRP 1001 P - Lined (polished, no drain bung, with tank lines)
Price: £448.00 (Ex VAT)
£537.60 (Inc VAT)
NRP 1001 PB - Lined (polished, with drain bung & tank lines)
Price: £466.00 (Ex VAT)
£559.20 (Inc VAT)
Norton Slimline Alloy Oil Tank for Pre-Unit Engines, Painted & Lined Premium Type
24 month warranty
Same specification as the NRP 1001 P above. We now have paint shop facilities and we are able to offer this tank painted, lined and lacquered as shown in the pictures. All of our sprayed products are oven cured and are lacquered with two pack paint.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
NRP 1001 S (single colour paint, no lines, no drain bung)
Price: £529.00 (Ex VAT)
£634.80 (Inc VAT)
NRP 1001 SB (single colour paint, no lines, with drain bung)
Price: £604.00 (Ex VAT)
£724.80 (Inc VAT)
NRP 1001 PL (painted & lined, no drain bung)
Price: £631.00 (Ex VAT)
£757.20 (Inc VAT)
NRP 1001 PLB (painted & lined with drain bung)
Price: £643.00 (Ex VAT)
£771.60 (Inc VAT)
The Norton oil tank lines shown on the tank will only fit our oil tanks, but are available separately.
Norton Oil Tank Lines:
Right Hand Side - NRP 0-0132 - Price £15.95 (Ex VAT), £19.14 (Inc VAT)
Left Hand Side - NRP 0-0133 - Price £15.95 (Ex VAT), £19.14 (Inc VAT)
Same specification as the NRP 1001 P above. We now have paint shop facilities and we are able to offer this tank painted, lined and lacquered as shown in the pictures. All of our sprayed products are oven cured and are lacquered with two pack paint.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
NRP 1001 S (single colour paint, no lines, no drain bung)
Price: £529.00 (Ex VAT)
£634.80 (Inc VAT)
NRP 1001 SB (single colour paint, no lines, with drain bung)
Price: £604.00 (Ex VAT)
£724.80 (Inc VAT)
NRP 1001 PL (painted & lined, no drain bung)
Price: £631.00 (Ex VAT)
£757.20 (Inc VAT)
NRP 1001 PLB (painted & lined with drain bung)
Price: £643.00 (Ex VAT)
£771.60 (Inc VAT)
The Norton oil tank lines shown on the tank will only fit our oil tanks, but are available separately.
Norton Oil Tank Lines:
Right Hand Side - NRP 0-0132 - Price £15.95 (Ex VAT), £19.14 (Inc VAT)
Left Hand Side - NRP 0-0133 - Price £15.95 (Ex VAT), £19.14 (Inc VAT)
Norton Oil Level Sight Tube
12 month warranty
This is a new addition to our oil tank optional extras. This oil level tube comes complete with banjos, banjo bolts, copper washers, oil level tube, and threaded aluminium bosses ready to be welded into our Slimline and Wideline oil tanks. This kit is also available as an add-on to your existing alloy oil tank. This kit is perfect for seats with no cutaway for the oil filler cap. This kit will enable you to check your oil level without having to remove the seat unit.
NRP 0-0127 (kit only)
Price: £55.24 (Ex VAT)
£66.29 (Inc VAT)
NRP 0-0127 W (kit welded in to one of our oil tanks)
Price: £77.00 (Ex VAT)
£92.40 (Inc VAT)
NRP 0-0128 (Sight tube only)
Price: £1.00 (Ex VAT)
£1.20 (Inc VAT)
This is a new addition to our oil tank optional extras. This oil level tube comes complete with banjos, banjo bolts, copper washers, oil level tube, and threaded aluminium bosses ready to be welded into our Slimline and Wideline oil tanks. This kit is also available as an add-on to your existing alloy oil tank. This kit is perfect for seats with no cutaway for the oil filler cap. This kit will enable you to check your oil level without having to remove the seat unit.
NRP 0-0127 (kit only)
Price: £55.24 (Ex VAT)
£66.29 (Inc VAT)
NRP 0-0127 W (kit welded in to one of our oil tanks)
Price: £77.00 (Ex VAT)
£92.40 (Inc VAT)
NRP 0-0128 (Sight tube only)
Price: £1.00 (Ex VAT)
£1.20 (Inc VAT)
Norton Wideline & Slimline Oil Tank Remote Drain Block
12 month warranty
This is our new CNC machined and polished, Norton remote oil drain block for easy oil changes. This unit clamps to the bottom frame cross tube, and can be positioned centrally or on the outside right hand side of the engine plate mounting lugs. This allows very easy access to the drain bolt, allowing ALL of the oil to be drained from the oil tank without removing it. No mess, quick and easy. The block is secured with two polished stainless bolts, washers and spring washers. The alloy block is polished duralium, with a brass drain bolt and a ¹⁄₄" BSP copper washer. The transfer hose from the oil tank is held onto ³⁄₈" spigots with stainless hose clips, with spiral hose binding wrapped around the hose to prevent chafing. This unit can be easily fitted to your frame with no modifications.
NRP 0-0153
Price: £63.80 (Ex VAT)
£76.56 (Inc VAT)
This is our new CNC machined and polished, Norton remote oil drain block for easy oil changes. This unit clamps to the bottom frame cross tube, and can be positioned centrally or on the outside right hand side of the engine plate mounting lugs. This allows very easy access to the drain bolt, allowing ALL of the oil to be drained from the oil tank without removing it. No mess, quick and easy. The block is secured with two polished stainless bolts, washers and spring washers. The alloy block is polished duralium, with a brass drain bolt and a ¹⁄₄" BSP copper washer. The transfer hose from the oil tank is held onto ³⁄₈" spigots with stainless hose clips, with spiral hose binding wrapped around the hose to prevent chafing. This unit can be easily fitted to your frame with no modifications.
NRP 0-0153
Price: £63.80 (Ex VAT)
£76.56 (Inc VAT)
Norton Slimline Oil Tank for Unit Engines Standard Type
Standard type Norton Slimline alloy oil tanks for Triumph Triton Twin unit engines coming soon. Lower prices than premium oil tanks.
Norton Slimline Oil Tank for Unit Engines - Polished Premium Type
24 month warranty
This is our Premium Norton Slimline alloy oil tank for Triumph Triton Twin unit engines. The breathers are located on the right hand side for easy routing of the breather hose. We have welded in an internal breather baffle in line with all of our premium oil tanks. We have increased the amount of holes in the return pipe to reduce air bubbles in the oil, the oil now dribbles back to tank. This design is made from two pieces of aluminium and formed on our special tooling, this gives fantastic accuracy everytime. The oil feed sealing washers, banjo's & oil filter bolts are available from us. Oil Filter Bolt NRP 061159F plated steel or stainless - Banjo NRP 0-0110 - Sealing washers NRP 042065)
See further down the page for the oil tank fitting kit NRP 0-0011R.
The oil tank has a maximum capacity of 2.8 litres. The tank sides have been formed to follow the curved form of the frame giving a uniform look. When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
Breather Kits and Step Up Adaptors are available, see NRP 0-0078 and NRP 0-0072.
Norton Remote Oil Drain Blocks are available for all of our Norton alloy oil tanks, please see NRP 0-0153 further down the page.
All of our oil tanks come with fitting instructions.
NRP 1001 TR (raw, not polished, no drain bung)
Price: £373.00 (Ex VAT)
£447.60 (Inc VAT)
NRP 1001 TBR (raw, not polished with drain bung)
Price: £391.00 (Ex VAT)
£469.20 (Inc VAT)
NRP 1001 T (polished, no drain bung)
Price: £404.00 (Ex VAT)
£484.80 (Inc VAT)
NRP 1001 TB (polished, with drain bung - shown in pictures above)
Price: £422.00 (Ex VAT)
£506.40 (Inc VAT)
NRP 1001 T - Lined (polished with tank lines, no drain bung)
Price: £428.00 (Ex VAT)
£513.60 (Inc VAT)
NRP 1001 TB - Lined (polished with tank lines & drain bung)
Price: £446.00 (Ex VAT)
£535.20 (Inc VAT)
NRP Slimline Premium Oil Tank for Unit Engines, Painted and Lined
24 month warranty
This is our Premium Slimline alloy oil tank for Triumph Triton Twin unit construction engines (i.e. Triumph T120, T140). The breathers are located on the right hand side for easy routing of the breather pipes. We also offer a drain bung version for easy oil changes. We have welded in an internal breather baffle in line with all of our premium Norton alloy oil tanks. We have increased the amount of holes in the return pipe to reduce air bubbles in the oil, the oil now dribbles back to tank. This new design is made from two pieces of aluminium and formed on our special tooling which gives fantastic accuracy, allowing us to introduce Norton oil tank lines that will fit perfectly every time. The oil feed sealing washers, banjo's & oil filter bolts are available from us.
Norton Oil Filter Bolt NRP 061159F plated steel or stainless
Norton Banjo NRP 0-0110 - Norton sealing washers NRP 042065 )
See below for Norton oil tank fitting kit - NRP 0-0011R
Norton Remote Oil Drain Blocks are available for all of our Norton alloy oil tanks, please see NRP 0-0153 further up the page.
This oil tank comes in metallic silver, lined and lacquered. We can supply this oil tank in a single colour with no lines. All of our paint is oven cured.
NRP 1001 TS (painted, no tank lines)
Price: £523.00 (Ex VAT)
£627.60 (Inc VAT)
NRP 1001 TSB (painted, no tank lines, with drain bung)
Price: £541.00 (Ex VAT)
£649.20 (Inc VAT)
NRP 1001 TPL (painted & lined, no drain bung)
Price: £604.00 (Ex VAT)
£724.80 (Inc VAT)
NRP 1001 TPLB (painted & lined, with drain bung) ** in stock now **
Price: £622.00 (Ex VAT)
£746.40 (Inc VAT)
This is our Premium Slimline alloy oil tank for Triumph Triton Twin unit construction engines (i.e. Triumph T120, T140). The breathers are located on the right hand side for easy routing of the breather pipes. We also offer a drain bung version for easy oil changes. We have welded in an internal breather baffle in line with all of our premium Norton alloy oil tanks. We have increased the amount of holes in the return pipe to reduce air bubbles in the oil, the oil now dribbles back to tank. This new design is made from two pieces of aluminium and formed on our special tooling which gives fantastic accuracy, allowing us to introduce Norton oil tank lines that will fit perfectly every time. The oil feed sealing washers, banjo's & oil filter bolts are available from us.
Norton Oil Filter Bolt NRP 061159F plated steel or stainless
Norton Banjo NRP 0-0110 - Norton sealing washers NRP 042065 )
See below for Norton oil tank fitting kit - NRP 0-0011R
Norton Remote Oil Drain Blocks are available for all of our Norton alloy oil tanks, please see NRP 0-0153 further up the page.
This oil tank comes in metallic silver, lined and lacquered. We can supply this oil tank in a single colour with no lines. All of our paint is oven cured.
NRP 1001 TS (painted, no tank lines)
Price: £523.00 (Ex VAT)
£627.60 (Inc VAT)
NRP 1001 TSB (painted, no tank lines, with drain bung)
Price: £541.00 (Ex VAT)
£649.20 (Inc VAT)
NRP 1001 TPL (painted & lined, no drain bung)
Price: £604.00 (Ex VAT)
£724.80 (Inc VAT)
NRP 1001 TPLB (painted & lined, with drain bung) ** in stock now **
Price: £622.00 (Ex VAT)
£746.40 (Inc VAT)
Norton Slimline Alloy Oil Tank Fitting Kit
This kit will work with our platform NRP 0-002
24 month warranty
This kit comprises of:
1 x Stainless Steel Rod
2 x Stainless Steel R Clips
2 x Aluminium Spacers
8 x 3mm Rubber Washers
1 x Rubber Tube
2 x 370mm x 4.8mm Cable Ties
3 x Frame Rubbers
NRP 0-0011R
Price: £35.74 (Ex VAT)
£42.89 (Inc VAT)
24 month warranty
This kit comprises of:
1 x Stainless Steel Rod
2 x Stainless Steel R Clips
2 x Aluminium Spacers
8 x 3mm Rubber Washers
1 x Rubber Tube
2 x 370mm x 4.8mm Cable Ties
3 x Frame Rubbers
NRP 0-0011R
Price: £35.74 (Ex VAT)
£42.89 (Inc VAT)
Norton Wideline & Slimline Pre-Unit Oil Tank Platform with Drain Bung Hole
12 month warranty
This platform can be used on Norton Wideline, Manx and Slimline frames. It is suitable to use with our Norton Wideline & Slimline Pre-Unit oil tanks. The platform is highly polished and made from 6 mm Marine Grade Duralium. It has an aperture for access to the oil tank drain bung. It comes complete with a stainless steel fastener kit using nyloc cap nuts for an aesthetically pleasing look. Two 3 mm rubber bonded pads have been fitted on the upper face and slotted Dural brackets allow vertical & tilting adjustment. The angled brackets have been machined to fit the Norton Atlas engine plates with 2¹⁄₂" centres, if fitting to Norton 500 plates the rear most hole can be used but the front mounting hole will need to be drilled in the engine plate. Can be used with our Norton alloy pre-unit oil tanks, with or without a drain bung.
NRP 0-002
Price: £46.15 (Ex VAT)
£55.37 (Inc VAT)
This platform can be used on Norton Wideline, Manx and Slimline frames. It is suitable to use with our Norton Wideline & Slimline Pre-Unit oil tanks. The platform is highly polished and made from 6 mm Marine Grade Duralium. It has an aperture for access to the oil tank drain bung. It comes complete with a stainless steel fastener kit using nyloc cap nuts for an aesthetically pleasing look. Two 3 mm rubber bonded pads have been fitted on the upper face and slotted Dural brackets allow vertical & tilting adjustment. The angled brackets have been machined to fit the Norton Atlas engine plates with 2¹⁄₂" centres, if fitting to Norton 500 plates the rear most hole can be used but the front mounting hole will need to be drilled in the engine plate. Can be used with our Norton alloy pre-unit oil tanks, with or without a drain bung.
NRP 0-002
Price: £46.15 (Ex VAT)
£55.37 (Inc VAT)
Norton Slimline Oil Tank/Battery Box Platform - Fits Norton Atlas models
12 month warranty
This Norton Atlas alloy platform has been designed to use with the standard OEM Norton Atlas oil tank & battery box assembly. Made from duralium, polished, and comes complete with stainless fasteners to bolt to the engine plates. Will work with our alloy engine plates as well as standard Norton Atlas steel engine plates.
NRP 0-007
Price: £74.80 (Ex VAT)
£89.76 (Inc VAT)
This Norton Atlas alloy platform has been designed to use with the standard OEM Norton Atlas oil tank & battery box assembly. Made from duralium, polished, and comes complete with stainless fasteners to bolt to the engine plates. Will work with our alloy engine plates as well as standard Norton Atlas steel engine plates.
NRP 0-007
Price: £74.80 (Ex VAT)
£89.76 (Inc VAT)
Norton Oil Level Sight Tube for alloy oil tanks
NRP 0-0127 Example of NRP 0-0127 welded in
12 month warranty
This is a new addition to our Norton alloy oil tank optional extras. This oil level tube comes complete with banjos, banjo bolts, copper washers, oil level tube, and threaded aluminium bosses ready to be welded into our Norton slimline and wideline alloy oil tanks. This kit is also available as an add-on to your existing alloy oil tank. This kit is perfect for seats with no cutaway for the oil filler cap. This kit will enable you to check your oil level without having to remove the seat unit.
NRP 0-0127 (kit only)
Price: £55.24 (Ex VAT)
£66.29 (Inc VAT)
NRP 0-0127 W (kit welded in on one of our oil tanks)
Price: £77.00 (Ex VAT)
£92.40 (Inc VAT)
NRP 0-0128 (Sight tube only)
Price: £1.00 (Ex VAT)
£1.20 (Inc VAT)
12 month warranty
This is a new addition to our Norton alloy oil tank optional extras. This oil level tube comes complete with banjos, banjo bolts, copper washers, oil level tube, and threaded aluminium bosses ready to be welded into our Norton slimline and wideline alloy oil tanks. This kit is also available as an add-on to your existing alloy oil tank. This kit is perfect for seats with no cutaway for the oil filler cap. This kit will enable you to check your oil level without having to remove the seat unit.
NRP 0-0127 (kit only)
Price: £55.24 (Ex VAT)
£66.29 (Inc VAT)
NRP 0-0127 W (kit welded in on one of our oil tanks)
Price: £77.00 (Ex VAT)
£92.40 (Inc VAT)
NRP 0-0128 (Sight tube only)
Price: £1.00 (Ex VAT)
£1.20 (Inc VAT)
Norton Wideline & Slimline Oil Tank Remote Drain Block
12 month warranty
This is our new Norton remote oil drain block for easy oil changes. This unit clamps to the bottom frame cross tube, and can be positioned centrally or on the outside right hand side of the engine plate mounting lugs. This allows very easy access to the drain bolt, allowing ALL of the oil to be drained from the oil tank without removing it. No mess, quick and easy. The block is secured with two polished stainless bolts, washers and spring washers. The alloy block is polished duralium, with a brass drain bolt and a¹⁄₄" BSP copper washer. The transfer hose from the oil tank is held onto ³⁄₈" spigots with stainless hose clips, with spiral hose binding wrapped around the hose to prevent chafing. This unit can be easily fitted to your frame with no modifications.
NRP 0-0153
Price: £63.80 (Ex VAT)
£76.56 (Inc VAT)
Norton Wideline Alloy Oil Tanks
Norton Wideline Alloy Oil Tank for Pre-Unit Engines Standard Type
Pictures above are of our standard Norton Wideline alloy oil tank - RAW - for pre-unit engines. Pictures of polished and painted oil tanks will be added in due course. Lower prices than premium Norton alloy oil tanks.
24 month warranty
Norton Wideline 'standard' alloy oil tank for pre-unit engines. This design is made from one piece of aluminium and formed on our special tooling, this gives fantastic accuracy, allowing us to introduce Norton oil tank lines that will fit perfectly every time. The standard alloy oil tank has a single 6mm breather pipe. Overbraided breather hose NRP 605143 ¹⁄₄" (6 mm) i.d. should be used for the vent pipe on top of the oil tank. The oil feed sealing washers, banjo's & oil filter bolts are available from us. (Norton Oil Filter Bolt NRP 061159F plated stell or stainless - Norton Banjo NRP 0-0110 - Norton sealing washers NRP 042065). The return pipe is 8mm - ⁵⁄₁₆" o.d. and is suitable for OHV Norton singles, Norton and Triumph Triton twins. The oil tank comes complete with a 2" Monza Cap. Welded brackets and a tube across the top of the tank have been used for mounting the tank to the frame using the original OEM brackets for the tool box. Use our Norton alloy oil tank fitting kit (NRP 0-0013R) to isolate the tank from vibration. (See below for fitting kits.) Maximum capacity of this tank is 3 litres or 5.3 pints.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
Norton Remote Oil Drain Blocks are available for all of our Norton alloy oil tanks, please see NRP 0-0153 further up the page.
If you want to use a Norton alloy oil tank platform, use NRP 0-002 Platform further up the page.
NRP 2005 R (raw, no drain bung)
Price: £289.00 (Ex VAT)
£346.80 (Inc VAT)
NRP 2005 RB (raw with drain bung)
Price: £308.00 (Ex VAT)
£369.60 (Inc VAT)
NRP 2005 S (no drain bung, single colour - no tank lines)
Price: £439.00 (Ex VAT)
£526.80 (Inc VAT)
NRP 2005 SB (with drain bung, single colour - no tank lines)
Price: £458.00 (Ex VAT)
£549.60 (Inc VAT)
NRP 2005 PL (no drain bung, metallic silver & Lined)
Price: £547.85 (Ex VAT)
£657.42 (Inc VAT)
NRP 2005 PLB (with drain bung, metallic silver & Lined)
Price: £565.75 (Ex VAT)
£678.90 (Inc VAT)
24 month warranty
Norton Wideline 'standard' alloy oil tank for pre-unit engines. This design is made from one piece of aluminium and formed on our special tooling, this gives fantastic accuracy, allowing us to introduce Norton oil tank lines that will fit perfectly every time. The standard alloy oil tank has a single 6mm breather pipe. Overbraided breather hose NRP 605143 ¹⁄₄" (6 mm) i.d. should be used for the vent pipe on top of the oil tank. The oil feed sealing washers, banjo's & oil filter bolts are available from us. (Norton Oil Filter Bolt NRP 061159F plated stell or stainless - Norton Banjo NRP 0-0110 - Norton sealing washers NRP 042065). The return pipe is 8mm - ⁵⁄₁₆" o.d. and is suitable for OHV Norton singles, Norton and Triumph Triton twins. The oil tank comes complete with a 2" Monza Cap. Welded brackets and a tube across the top of the tank have been used for mounting the tank to the frame using the original OEM brackets for the tool box. Use our Norton alloy oil tank fitting kit (NRP 0-0013R) to isolate the tank from vibration. (See below for fitting kits.) Maximum capacity of this tank is 3 litres or 5.3 pints.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
Norton Remote Oil Drain Blocks are available for all of our Norton alloy oil tanks, please see NRP 0-0153 further up the page.
If you want to use a Norton alloy oil tank platform, use NRP 0-002 Platform further up the page.
NRP 2005 R (raw, no drain bung)
Price: £289.00 (Ex VAT)
£346.80 (Inc VAT)
NRP 2005 RB (raw with drain bung)
Price: £308.00 (Ex VAT)
£369.60 (Inc VAT)
NRP 2005 S (no drain bung, single colour - no tank lines)
Price: £439.00 (Ex VAT)
£526.80 (Inc VAT)
NRP 2005 SB (with drain bung, single colour - no tank lines)
Price: £458.00 (Ex VAT)
£549.60 (Inc VAT)
NRP 2005 PL (no drain bung, metallic silver & Lined)
Price: £547.85 (Ex VAT)
£657.42 (Inc VAT)
NRP 2005 PLB (with drain bung, metallic silver & Lined)
Price: £565.75 (Ex VAT)
£678.90 (Inc VAT)
Norton Wideline Alloy Oil Tank for Pre-Unit Engines Standard Type
24 month warranty
This is our new Norton Wideline 'standard' alloy oil tank for pre-unit Norton & Triumph Triton Twin engines. Can also be used for Norton OHV singles
Same spec as above. Available with or without Norton oil tank lines, with or without a drain bung.
NRP 2005 P (polished, no drain bung) # in stock #
Price: £312.00 (Ex VAT)
£374.00 (Inc VAT)
NRP 2005 PB (polished, with drain bung)
Price: £331.00 (Ex VAT)
£397.20 (Inc VAT)
NRP 2005 P-Lined (polished - no drain bung, with tank lines)
Price: £363.62 (Ex VAT)
£436.34 (Inc VAT)
NRP 2005 PB-Lined (polished with drain bung & tank lines)
Price: £381.52 (Ex VAT)
£457.82 (Inc VAT)
This is our new Norton Wideline 'standard' alloy oil tank for pre-unit Norton & Triumph Triton Twin engines. Can also be used for Norton OHV singles
Same spec as above. Available with or without Norton oil tank lines, with or without a drain bung.
NRP 2005 P (polished, no drain bung) # in stock #
Price: £312.00 (Ex VAT)
£374.00 (Inc VAT)
NRP 2005 PB (polished, with drain bung)
Price: £331.00 (Ex VAT)
£397.20 (Inc VAT)
NRP 2005 P-Lined (polished - no drain bung, with tank lines)
Price: £363.62 (Ex VAT)
£436.34 (Inc VAT)
NRP 2005 PB-Lined (polished with drain bung & tank lines)
Price: £381.52 (Ex VAT)
£457.82 (Inc VAT)
Norton Wideline Alloy Oil Tank for Pre-Unit Engines - Raw - Premium Type
24 month warranty
This is our Raw finish (not polished) premium Norton Wideline alloy oil tank for pre-unit engines. Same spec as the polished version below.
NRP 1005 R (raw, no drain bung)
Price: £324.00 (Ex VAT)
£388.80 (Inc VAT)
NRP 1005 RB (raw, with drain bung)
Price: £342.00 (Ex VAT)
£410.40 (Inc VAT)
This is our Raw finish (not polished) premium Norton Wideline alloy oil tank for pre-unit engines. Same spec as the polished version below.
NRP 1005 R (raw, no drain bung)
Price: £324.00 (Ex VAT)
£388.80 (Inc VAT)
NRP 1005 RB (raw, with drain bung)
Price: £342.00 (Ex VAT)
£410.40 (Inc VAT)
Norton Wideline Alloy Oil Tank for Pre-Unit Engines - Polished - Premium Type
24 month warranty
This is our Norton Wideline premium alloy oil tank for pre-unit engines. We have welded in an internal breather baffle in line with all of our premium oil tanks. We have increased the amount of holes in the return pipe to reduce air bubbles in the oil, the oil now dribbles back to tank. This design is made from one piece of aluminium and formed on our special tooling, this gives fantastic accuracy, allowing us to introduce tank lines that will fit perfectly every time. The oil feed sealing washers, banjo's and filter bolts are available from us.(Norton Oil Filter Bolt NRP 061159F plated steel or stainless - Norton Banjo NRP 0-0110 - Norton sealing washers NRP 042065). The return pipe is 8mm - ⁵⁄₁₆" o.d. and is suitable for Norton OHV singles and twins, & Triumph Triton Twins. The oil tank comes complete with a 2" Monza Cap. Two large breathers are situated on top of the tank to allow the engine to breath into and vent out of the oil tank with an O.D. the same as the Norton Commando and Norton Atlas twins. Welded brackets and a tube across the top of the tank have been used for mounting the tank to the frame using the original OEM brackets for the tool box. Use our fitting kit (NRP 0-0013R) to isolate the tank from vibration. (See below for fitting kits.) Maximum capacity of this tank is 3 litres or 5.3 pints.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
Breather Kits and Step Up Adaptors are available, see NRP 0-0078 and NRP 0-0072.
Norton Remote Oil Drain Blocks are available for all of our oil tanks, please see NRP 0-0153 further up the page.
If you want to use a Norton alloy oil tank platform, use NRP 0-002 Platform further up the page.
NRP 1005 P (polished, no drain bung)
Price: £347.00 (Ex VAT)
£416.40 (Inc VAT)
NRP 1005 PB (polished, with drain bung)
Price: £365.00 (Ex VAT)
£438.00 (Inc VAT)
NRP 1005 P-Lined (polished - no drain bung, with tank lines) - no pics yet -
Price: £373.00 (Ex VAT)
£447.60 (Inc VAT)
NRP 1005 PB-Lined (polished with drain bung & tank lines) - no pics yet -
Price: £392.00 (Ex VAT)
£470.40 (Inc VAT)
This is our Norton Wideline premium alloy oil tank for pre-unit engines. We have welded in an internal breather baffle in line with all of our premium oil tanks. We have increased the amount of holes in the return pipe to reduce air bubbles in the oil, the oil now dribbles back to tank. This design is made from one piece of aluminium and formed on our special tooling, this gives fantastic accuracy, allowing us to introduce tank lines that will fit perfectly every time. The oil feed sealing washers, banjo's and filter bolts are available from us.(Norton Oil Filter Bolt NRP 061159F plated steel or stainless - Norton Banjo NRP 0-0110 - Norton sealing washers NRP 042065). The return pipe is 8mm - ⁵⁄₁₆" o.d. and is suitable for Norton OHV singles and twins, & Triumph Triton Twins. The oil tank comes complete with a 2" Monza Cap. Two large breathers are situated on top of the tank to allow the engine to breath into and vent out of the oil tank with an O.D. the same as the Norton Commando and Norton Atlas twins. Welded brackets and a tube across the top of the tank have been used for mounting the tank to the frame using the original OEM brackets for the tool box. Use our fitting kit (NRP 0-0013R) to isolate the tank from vibration. (See below for fitting kits.) Maximum capacity of this tank is 3 litres or 5.3 pints.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size.
Breather Kits and Step Up Adaptors are available, see NRP 0-0078 and NRP 0-0072.
Norton Remote Oil Drain Blocks are available for all of our oil tanks, please see NRP 0-0153 further up the page.
If you want to use a Norton alloy oil tank platform, use NRP 0-002 Platform further up the page.
NRP 1005 P (polished, no drain bung)
Price: £347.00 (Ex VAT)
£416.40 (Inc VAT)
NRP 1005 PB (polished, with drain bung)
Price: £365.00 (Ex VAT)
£438.00 (Inc VAT)
NRP 1005 P-Lined (polished - no drain bung, with tank lines) - no pics yet -
Price: £373.00 (Ex VAT)
£447.60 (Inc VAT)
NRP 1005 PB-Lined (polished with drain bung & tank lines) - no pics yet -
Price: £392.00 (Ex VAT)
£470.40 (Inc VAT)
Norton Wideline Alloy Oil Tank for Pre-Unit Engines - Painted & Lined - Premium type
24 month warranty
The oil tank is the same spec as above. You can have a single colour or sprayed metallic silver and lined with Norton red & black oil tank lines as shown in the pictures. An additional Norton Oil Level Sight Tube was added to the oil tank above, part number NRP 0-0127 The oil level sight tube can be seen further up the page. All of our paint is oven cured.
NRP 1005 S (no drain bung, single colour - no tank lines)
Price: £474.00 (Ex VAT)
£568.80 (Inc VAT)
NRP 1005 SB (with drain bung, single colour - no tank lines)
Price: £492.00 (Ex VAT)
£590.40 (Inc VAT)
NRP 1005 PL (no drain bung, metallic silver & lined)
Price: £581.00 (Ex VAT)
£697.20 (Inc VAT)
NRP 1005 PLB (with drain bung, metallic silver & lined)
Price: £599.00 (Ex VAT)
£718.80 (Inc VAT)
The oil tank is the same spec as above. You can have a single colour or sprayed metallic silver and lined with Norton red & black oil tank lines as shown in the pictures. An additional Norton Oil Level Sight Tube was added to the oil tank above, part number NRP 0-0127 The oil level sight tube can be seen further up the page. All of our paint is oven cured.
NRP 1005 S (no drain bung, single colour - no tank lines)
Price: £474.00 (Ex VAT)
£568.80 (Inc VAT)
NRP 1005 SB (with drain bung, single colour - no tank lines)
Price: £492.00 (Ex VAT)
£590.40 (Inc VAT)
NRP 1005 PL (no drain bung, metallic silver & lined)
Price: £581.00 (Ex VAT)
£697.20 (Inc VAT)
NRP 1005 PLB (with drain bung, metallic silver & lined)
Price: £599.00 (Ex VAT)
£718.80 (Inc VAT)
Norton Wideline Pre-Unit Alloy Oil Tank Fitting Kit
This kit will work with our platform NRP 0-002
24 month warranty
This kit comprises of:
1 x Stainless Steel Rod
2 x Stainless Steel R Clips
2 x Stainless Shouldered Washers
2 x Stainless Form C Washers
6 x 3mm Rubber Washers
1 x Rubber Tube
2 x 370mm x 4.8mm Cable Ties
3 x Frame Rubbers
NRP 0-0013R
Price: £36.00 (Ex VAT)
£43.20 (Inc VAT)
24 month warranty
This kit comprises of:
1 x Stainless Steel Rod
2 x Stainless Steel R Clips
2 x Stainless Shouldered Washers
2 x Stainless Form C Washers
6 x 3mm Rubber Washers
1 x Rubber Tube
2 x 370mm x 4.8mm Cable Ties
3 x Frame Rubbers
NRP 0-0013R
Price: £36.00 (Ex VAT)
£43.20 (Inc VAT)
Norton Wideline Alloy Oil Tank for Unit Engines - Premium Type
24 month warranty
This tank is suitable for a Norton wideline frame. This oil tank is wider and shorter than the Pre-Unit model to allow clearance of the engine, for example Triumph T120/T140 etc. This oil tank has an internal baffle as used in all of our premium oil tanks. The oil feed sealing washers, banjo's & oil filter bolts are available from us. (Norton Oil Filter Bolt NRP 061159F plated steel or stainless - Norton Banjo NRP 0-0110 - Norton sealing washers NRP 042065). The return pipe is 8mm - ⁵⁄₁₆" o.d. The return pipe is located in the base allowing easier routing to the oil pick up on the engine. The oil tank comes complete with a 2" Monza Cap. Two large breathers are situated on top of the tank to allow the engine to breath into and vent out of the oil tank with an O.D. of 12mm. Breather kits and Step-Up adapters are available (see Breather Kits below). Welded brackets and a tube across the top of the tank have been used for mounting the tank to the frame. The oil tank sits directly on top of the frame cross tube with a specially contoured mounting assembly welded under the tank. (See below for correct fitting kit - NRP 0-0077) Maximum capacity of this tank is approx. 2.7 litres.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size. Please state part number below when ordering.
Remote Oil Drain Blocks are now available for Featherbed oil tanks, see NRP 0-0153 further up the page.
NRP 1005 T (no drain bung)
Price: £478.00 (Ex VAT)
£573.60 (Inc VAT)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
NRP 1005 TB (with drain bung)
Price: £502.00 (Ex VAT)
£602.40 (Inc VAT)
This tank is suitable for a Norton wideline frame. This oil tank is wider and shorter than the Pre-Unit model to allow clearance of the engine, for example Triumph T120/T140 etc. This oil tank has an internal baffle as used in all of our premium oil tanks. The oil feed sealing washers, banjo's & oil filter bolts are available from us. (Norton Oil Filter Bolt NRP 061159F plated steel or stainless - Norton Banjo NRP 0-0110 - Norton sealing washers NRP 042065). The return pipe is 8mm - ⁵⁄₁₆" o.d. The return pipe is located in the base allowing easier routing to the oil pick up on the engine. The oil tank comes complete with a 2" Monza Cap. Two large breathers are situated on top of the tank to allow the engine to breath into and vent out of the oil tank with an O.D. of 12mm. Breather kits and Step-Up adapters are available (see Breather Kits below). Welded brackets and a tube across the top of the tank have been used for mounting the tank to the frame. The oil tank sits directly on top of the frame cross tube with a specially contoured mounting assembly welded under the tank. (See below for correct fitting kit - NRP 0-0077) Maximum capacity of this tank is approx. 2.7 litres.
When ordering this tank, please state the model and make of your engine that you are fitting to your frame as it may affect the oil return pipe size. Please state part number below when ordering.
Remote Oil Drain Blocks are now available for Featherbed oil tanks, see NRP 0-0153 further up the page.
NRP 1005 T (no drain bung)
Price: £478.00 (Ex VAT)
£573.60 (Inc VAT)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
NRP 1005 TB (with drain bung)
Price: £502.00 (Ex VAT)
£602.40 (Inc VAT)
Norton Wideline Unit Alloy Oil Tank Fitting Kit
24 month warranty
This kit comprises of:
1 x Stainless Steel Rod
2 x Stainless Steel R Clips
2 x Stainless Shouldered Washers
2 x Stainless Form C Washers
2 x 3mm Rubber Washers
1 x Rubber Tube
2 x 370mm x 4.8mm Cable Ties
3 x Frame Rubbers
NRP 0-0077
Price: £31.72 (Ex VAT)
£38.30 (Inc VAT)
This kit comprises of:
1 x Stainless Steel Rod
2 x Stainless Steel R Clips
2 x Stainless Shouldered Washers
2 x Stainless Form C Washers
2 x 3mm Rubber Washers
1 x Rubber Tube
2 x 370mm x 4.8mm Cable Ties
3 x Frame Rubbers
NRP 0-0077
Price: £31.72 (Ex VAT)
£38.30 (Inc VAT)
Norton Slimline & Wideline Alloy Oil Tank Breather Kit
This breather kit is suitable for all of our premium Norton alloy oil tanks and has an i.d. of 12mm, which is standard Norton Atlas size. The kit consists of 1250mm of reinforced breather hose, black high temp braided hose, three mini pipe clips and four shrink wrap tubes. One end of the breather hose has already been shrink wrapped. Simply cut the breather hose to length from your engine to the oil tank and shrink wrap the other end. The remainder can be used to vent the oil tank to the rear of the frame, shrink wrapping the ends to finish. Step up adapters are available for any engine for easy fitting, see below for adapters.
NRP 0-0078
Price: £11.72 (Ex VAT)
£14.06 (Inc VAT)
NRP 0-0078
Price: £11.72 (Ex VAT)
£14.06 (Inc VAT)
Triumph Triton Oil Breather Step Up Adapter
24 month warranty
This brass adapter is for stepping up your engine breather on Triumph T110 pre unit & T120 Unit engines. It should be used with our breather kit (NRP 0-0078). The spigot size is 9.5mm x 12mm. Other step ups are available on request and will be added in due course.
NRP 0-0072
Price: £10.45 (Ex VAT)
£12.54 (Inc VAT)
This brass adapter is for stepping up your engine breather on Triumph T110 pre unit & T120 Unit engines. It should be used with our breather kit (NRP 0-0078). The spigot size is 9.5mm x 12mm. Other step ups are available on request and will be added in due course.
NRP 0-0072
Price: £10.45 (Ex VAT)
£12.54 (Inc VAT)
Norton Oil Breather Step Up Adapter
This brass adapter is for stepping up your breather on a Norton Commando 850 and some 750 engines. It should be used with our breather kit (NRP 0-0078). The spigot size of 14.3mm x 12mm.
NRP 0-0160
Price: £10.45 (Ex VAT)
£12.54 (Inc VAT)
NRP 0-0160
Price: £10.45 (Ex VAT)
£12.54 (Inc VAT)
Norton Oil Filter Bolt
Norton Oil Filter Bolt suitable for all of our Norton alloy oil tanks, plated steel.
Made in England
NRP 061159F
Price: £20.95 (Ex VAT)
£25.14 (Inc VAT)
Made in England
NRP 061159F
Price: £20.95 (Ex VAT)
£25.14 (Inc VAT)
Norton Oil Filter Bolt - Stainless Steel
Norton Oil Filter Bolt, suitable for all of our Norton alloy oil tanks, polished stainless steel
Made in England.
NRP 061159 SS
Price: £33.00 (Ex VAT)
£39.60 (Inc VAT)
Made in England.
NRP 061159 SS
Price: £33.00 (Ex VAT)
£39.60 (Inc VAT)
Norton Oil Filter Sealing Washers
2 x Norton Oil Filter Bolt Sealing Washers. Suitable for all of our Norton alloy oil tanks.
NRP 042065
Price: £1.08 (Ex VAT)
£1.30 (Inc VAT)
NRP 042065
Price: £1.08 (Ex VAT)
£1.30 (Inc VAT)
Norton Alloy Oil Filter Banjo ⁵⁄₁₆" - 8mm O.D.
24 month warranty
This Norton oil tank banjo is a new addition to our range. We have started making these for our Norton alloy oil tanks to marry up to engines using ⁵⁄₁₆" - 8mm oil feed pipes i.e. Norton OHV singles and Dominator twins, will also fit Triumph twins, T150,T160 and many other road going engines. Made from brass and aluminium.
NRP 0-0110
Price: £15.94 (Ex VAT)
£19.13 (Inc VAT)
This Norton oil tank banjo is a new addition to our range. We have started making these for our Norton alloy oil tanks to marry up to engines using ⁵⁄₁₆" - 8mm oil feed pipes i.e. Norton OHV singles and Dominator twins, will also fit Triumph twins, T150,T160 and many other road going engines. Made from brass and aluminium.
NRP 0-0110
Price: £15.94 (Ex VAT)
£19.13 (Inc VAT)
Norton Pipe Connection Banjo ³⁄₈" O.D.
Norton oil tank Banjo, suitable for all of our Norton alloy oil tanks. ³⁄₈" O.D. normally fits 1970's Commando 850cc engines.
NRP 062207
Price: £12.70 (Ex VAT)
£15.24 (Inc VAT)
NRP 062207
Price: £12.70 (Ex VAT)
£15.24 (Inc VAT)
Norton T Junction for Oil - Rocker Feed
Rocker feed reducing T piece 5/16" (8mm) to 3/16" (4.8mm). Can be used inline with the oil return to tank to feed rocker gear.
NRP 0-0244
Price: £7.58 (Ex VAT)
£9.10 (Inc VAT)
Rocker feed reducing T piece 5/16" (8mm) to 1/4" (6.3mm). Can be used inline with the oil return to tank to feed rocker gear.
NRP 0-0253
Price: £7.58 (Ex VAT)
£9.10 (Inc VAT)
NRP 0-0244
Price: £7.58 (Ex VAT)
£9.10 (Inc VAT)
Rocker feed reducing T piece 5/16" (8mm) to 1/4" (6.3mm). Can be used inline with the oil return to tank to feed rocker gear.
NRP 0-0253
Price: £7.58 (Ex VAT)
£9.10 (Inc VAT)
Universal Metal T Junction for oil and fuel
Metal 'T' junction for ¹⁄₄" bore pipe.
As used on many british motorcycles.
Made in England.
NRP 73057
Price: £8.69 (Ex VAT)
£10.43 (Inc VAT)
As used on many british motorcycles.
Made in England.
NRP 73057
Price: £8.69 (Ex VAT)
£10.43 (Inc VAT)
Norton Oil Filter Mounting Head
Accepts Norton spin-on filter 06-3371 & Champion spin on oil filter NRP 97028C. Can be fitted to return oil lines on many British motorcycles where a replaceable filter is not used. Ideal for motorcycles with dry sump and separate oil tanks.
NRP 27985
Price: £25.28 (Ex VAT)
£30.33 (Inc VAT)
NRP 27985
Price: £25.28 (Ex VAT)
£30.33 (Inc VAT)
Norton Oil Filter - Spin on for oil filter mounting head
Norton spin on Oil Filter. Can be used on British dry sump engines. Specifically made for Nortons.
NRP 063371
Price: £6.55 (Ec VAT)
£7.85 (Inc VAT)
NRP 063371
Price: £6.55 (Ec VAT)
£7.85 (Inc VAT)
Champion Oil Filter H101
Genuine Champion Oil Filter fits Norton Commando 750 and 850 models. Can be used with Oil Filter Mounting block 06-3139 (NRP 27985) for many British motorcycles with dry sump and separate oil tanks. OEM: 06-3371
NRP 97028C
Price: £5.00 (Ex VAT)
£6.00 (Inc VAT)
NRP 97028C
Price: £5.00 (Ex VAT)
£6.00 (Inc VAT)
Silkolene Pro SRG 75 - Racing Gear Oil - FULLY SYNTHETIC
Ideal for Bewley and Jawa grass track boxes.
Designed to improve power and maintain consistent high performance. SAE 75W Crankcase rating SAE 10W-30. This grade has a naturally high viscosity index (ensuring good low temperature performance) and excellent shear strength, as well as possessing an inherently excellent load carrying capability. PRO SRG 75 provides very superior protection and performance under the most demanding race conditions.
PROSRG75 (1 Litre Can)
Price: £18.19 (Ex VAT)
£21.83 (Inc VAT)
Designed to improve power and maintain consistent high performance. SAE 75W Crankcase rating SAE 10W-30. This grade has a naturally high viscosity index (ensuring good low temperature performance) and excellent shear strength, as well as possessing an inherently excellent load carrying capability. PRO SRG 75 provides very superior protection and performance under the most demanding race conditions.
PROSRG75 (1 Litre Can)
Price: £18.19 (Ex VAT)
£21.83 (Inc VAT)
Silkolene Pro Chain - 100% Synthetic Racing Chain Oil
Suitable for Road & Off Road Use. For high performance road, racing and off-road motorcycles. 100% synthetic chain lubricant with exceptional anti-wear and anti-corrosion properties to resist high speed fling-off. For all chains including “O” and “X” ring types.
500 ml can
Price: £8.35 (Ex VAT) £10.02 (Inc VAT)
100 ml can
Price: £2.96 (Ex VAT) £3.55 (Inc VAT)
500 ml can
Price: £8.35 (Ex VAT) £10.02 (Inc VAT)
100 ml can
Price: £2.96 (Ex VAT) £3.55 (Inc VAT)
Silkolene Titanium Dry Lube
Non fling PTFE boosted Chain Lubricant. Suitable for Road & Off Road use. This hyper strong PTFE boosted formula resists high speed fling-off while providing exceptional anti-wear and anti-corrosion performance even in severe conditions. Silkolene Titanium Dri-Gel protects your chain, leaving it with a white “as new” finish. For all chains including “O” and “X” ring types.
500 ml can
Price: £7.91 (Ex VAT)
£9.49 (Inc VAT)
500 ml can
Price: £7.91 (Ex VAT)
£9.49 (Inc VAT)
Triumph Oil Pressure Switch
Triumph Veglia type oil pressure switch. As fitted to many Triumph models (1974-83) such as T140, T150, T160. Parallel/Straight thread. Replaces the Original Smiths switch which is no longer available
OEM: 60-3719
NRP 26086
Price: £9.65 (Ex VAT)
£11.58 (Inc VAT)
OEM: 60-3719
NRP 26086
Price: £9.65 (Ex VAT)
£11.58 (Inc VAT)